Fermacell Gypsum Fibreboard - 2400 x 1200 x 12.5mm

Yes, the board comes pre-primed and is ready for immediate decoration, including painting, after installation.

The square edge design allows for precise fitting and creates a seamless finish between boards, simplifying the installation process.

While durable, this specific board is not rated for direct exposure to constant moisture. For wet areas, appropriate waterproofing measures and potentially a different board type or system might be required.

It reduces costs by eliminating the need for skimming, speeding up installation time, and allowing for immediate decoration, thereby lowering labor expenses.

The dimensions are 2400mm in length, 1200mm in width, and 12.5mm in thickness.

Yes, the lightly textured surface provides good adhesion for tile adhesives. Ensure joints are properly treated and follow tile manufacturer guidelines.

It is manufactured from a premium gypsum fibre composite.

Ensure the pre-primed surface is clean and dry. If contamination occurred during installation, wipe down with a damp cloth and allow to dry completely before painting. Consider a light mist coat of primer if adhesion issues persist.

Verify that boards were cut precisely and installed with minimal gaps. Ensure correct jointing compound and tape (if applicable) were used according to manufacturer guidelines. Proper technique during installation is crucial for seamless results.

Confirm that the screws are appropriate for gypsum fibreboard and are of sufficient length to engage properly with the framing. Ensure screws are not overdriven, which can strip the material.

Handle boards with care, using appropriate lifting techniques. Minor edge damage may be filled with jointing compound, but significant damage might require board replacement.