Best current price£10.32from eBay
Shopping.co.uk recommended and popular offers
eBay£10.32Visit shop Rear Upper Control Arm Bush Fits Peugeot 407 508 Citroen C5 C6 Febi 45655
Visit shop10 offers from £10.32 - £16.56
View price history by clicking the chart icon.
This Febi Bilstein Wishbone / Control / Trailing Arm Bush (part number 45655) is designed for the rear axle of specific vehicles like the DS DS7 CROSSBACK and PEUGEOT 508 Mk1, offering a durable mounting solution for improved vehicle stability. While providing a reliable replacement part, it's crucial to confirm vehicle fitment before purchase, as it's typically supplied without installation instructions.
| Model Part Number | 45655 |
|---|---|
| Brand | febi bilstein |
The primary function is to act as a pivot point for the suspension arm while absorbing road shocks and vibrations, contributing to a smoother ride and maintaining suspension geometry.
Symptoms include clunking or rattling noises from the suspension, especially over bumps, uneven tire wear, poor handling, or a 'loose' feeling in the steering.
This bush is specified for the DS DS7 CROSSBACK (2017 onwards) and PEUGEOT 508 Mk1 (2010-2018) rear axles. Always use the vehicle fitment checker or contact us with your vehicle details to confirm compatibility.
The bush has an outer diameter of 45 mm, an inner diameter of 12 mm, and a length of 45 mm.
Typically, suspension mounting parts like this are supplied without fitting instructions. It is recommended that installation be performed by a qualified technician.
The weight of this wishbone/control arm bush is approximately 0.14 kg.
A trailing arm is a type of suspension linkage. This bush is designed to be used as a mounting point for such an arm, allowing it to pivot correctly while isolating noise and vibration.
Check if the wishbone/control arm bush is worn, cracked, or improperly seated. Inspect mounting bolts for tightness. Consider replacing the bush if damaged.
Inspect the suspension geometry. A worn or failed bush can affect wheel alignment. Have the alignment checked and the bush replaced if necessary.
A damaged bush can compromise suspension integrity. Verify the condition of all rear suspension bushes and replace any that show signs of wear or degradation.
Ensure you have the correct part for your vehicle. Suspension bushes may require specialized presses or tools for installation. Consult a professional mechanic if the part does not fit as expected.
Compatibility:
This Wishbone / Control / Trailing Arm Bush is specifically designed for the rear axle, upper and lower positions, of vehicles such as the DS DS7 CROSSBACK (from 2017 onwards) and PEUGEOT 508 Mk1 (2010-2018). Always use the provided make and model tool or consult with a specialist to verify fitment for your exact vehicle before purchase. Check part numbers against OE specifications if available.
Setup/Installation:
Installation of suspension components should ideally be performed by a qualified mechanic. Due to the nature of the part, it is typically supplied without fitting instructions. Proper tools and torque specifications are required for correct installation to ensure safety and performance. Incorrect installation can lead to premature failure or damage.
Care:
As a solid rubber or polyurethane component, this bush requires minimal direct care. However, its longevity is dependent on:
