Shopping.co.uk

Oxford Self-Adhesive Reflectors - 25mm - Pair

Oxford Self-Adhesive Reflectors - 25mm - Pair

The Oxford Self-Adhesive Reflectors are designed for easy installation and provide a simple way to...

Best current price£2.99from Demon Tweeks

Best offers

Shopping.co.uk recommended and popular offers

All Offers

9 offers from £2.99 - £9.36

View price history by clicking the chart icon.

Demon TweeksOxford Self-Adhesive Reflectors (Pair) - 25mm - Sold as a pair
£1.99 delivery
£2.99
Visit shop
eBayOxford Self Adhesive Reflectors 20mm Pair Motorcycle Motorbike Accessory
£2.95 delivery
£2.99
Visit shop

Product Information

Full details

The Oxford Self-Adhesive Reflectors are an essential safety upgrade for motorcycle and bicycle riders looking to increase their visibility on the road. Designed for quick, tool-free application, these 25mm reflectors are ideal for commuters and casual riders alike, though they require a clean, flat surface for long-term adhesion durability.

All features

Model Part NumberOX803
BrandOxford

Extended Product Information

FAQs

Are these reflectors street legal?

While they increase visibility, local laws vary regarding specific reflector requirements. Check your regional vehicle regulations.

Can I put these on my helmet?

Yes, their small size and adhesive backing make them suitable for adding reflective points to smooth helmet shells.

Will these damage my paintwork?

The adhesive is generally safe for factory finishes, but caution should be used when removing them. Use a heat gun on a low setting to soften the adhesive before gently peeling.

Do I need to sand the surface before applying?

No, do not sand the surface. Sanding can damage the paint and create an uneven surface that prevents the adhesive from creating a water-tight seal.

How many reflectors come in a pack?

Each retail pack contains a pair (two individual reflectors).

Troubleshooting

Reflector falling off shortly after application

The surface was likely not clean enough. Remove the old adhesive residue with a sticker remover, clean the area with alcohol, and apply a new pair.

Reduced visibility/reflectivity over time

Clean the surface of the reflector with mild soap and water to remove road grime and debris accumulation.

Pros and Cons

Pros

  • Extremely easy, peel-and-stick installation
  • No tools or hardware required
  • Compact size fits almost anywhere on a frame
  • Provides immediate, cost-effective safety boost

Cons

  • Requires a perfectly clean surface for proper bonding
  • Adhesive may lose strength if repeatedly removed and reapplied
  • Not suitable for highly textured or uneven surfaces

Setup, Compatibility & Care

Installation Steps:

  1. Identify a flat, rigid area on your bike frame or bodywork.
  2. Clean the surface thoroughly using isopropyl alcohol or a grease-removing cleaner to ensure no wax or dust remains.
  3. Allow the area to dry completely.
  4. Peel the backing off the reflector and press firmly onto the surface for at least 30 seconds.
  5. Wait 24 hours before exposing the adhesive to heavy rain or high-pressure washing to allow the bond to cure.

Care Instructions:

To maintain maximum reflectivity, wipe the surface of the reflectors with a soft, damp cloth. Avoid using harsh chemical solvents or abrasive brushes, as these can scratch the reflective coating and reduce visibility performance.

Price History

DatePrice
Visit shop