Travis Perkins White Primed 4 Panel Grained Door - 1981 x 762 x 35mm
Stirling grained moulded doors feature a four-panel grain effect design that gives a welcoming, tr...Stirling grained moulded doors feature a four-panel grain effect design that gives a welcoming, traditional appearance. Each door is supplied primed and ready to paint. Mixed material construction combines one piece grain effect facings, timber and man-made materials. Supplied primed ready to paint. Comes with lock block located on one side of the door that is highlighted by inkjet printing on the top edge of the door. Also available in glazed, fire door and bi-fold door versions. Door may be trimmed by up to 10mm in height or width. Any reductions must be removed equally from each edge. Textured faces are suitable for painting and have quality moulded panel facings with white base coated faces. Other sizes are available.
Travis Perkins White Primed 4 Panel Grained FD30 Fire Door 1981 x 838 x 44mm£35.00 delivery£122.58Visit shop →
Product Information
Full details
This guide is for homeowners and contractors using the Travis Perkins White Primed 4 Panel Grained Door. The door offers a traditional, welcoming appearance with its grain effect design, ready for painting to match any interior. A key consideration is the need for painting after installation. This guide covers setup, care, and troubleshooting to ensure optimal use.
All features
Colour
White
Model Part Number
12611
Brand
Travis Perkins
Extended Product Information
FAQs
Can I use any type of paint?
Yes, the door can be painted with most interior paints. However, use a primer for the best results.
How much can I trim the door?
You can trim the door up to 10mm in height or width. Ensure you remove the same amount from each edge.
What kind of hardware can I use?
Standard door hardware, including hinges, handles, and locks, is compatible.
Is the door fire-rated?
This model is not fire-rated, but fire door versions are available.
How do I clean the door?
Use a damp cloth to wipe the door's surface. Avoid using harsh chemicals.
Where can I find other sizes?
Other sizes are available.
Troubleshooting
Door doesn't fit the frame.
Check measurements before installation and ensure the door has been trimmed correctly. Make sure to trim evenly.
Paint finish is uneven.
Ensure the door is properly primed. Apply thin, even coats of paint, allowing each coat to dry completely.
Door sticks or rubs.
Check the hinges for proper alignment and tighten screws. Adjust the door if necessary.
Pros and Cons
Pros
Ready to paint, offering customization options.
Traditional four-panel design suits various interior styles.
Durable mixed material construction.
Lock block simplifies hardware installation.
Cons
Requires painting after installation, adding an extra step.
Trimming must be done evenly from all edges.
The white base coat may require additional coats for complete coverage.
Setup, Compatibility & Care
Preparation: Before installation, ensure the door frame is level and the opening is the correct size.
Trimming: If needed, trim the door evenly from all edges up to 10mm. Use a sharp saw and ensure clean cuts.
Hanging: Install the door using appropriate hinges and hardware. Refer to the manufacturer's instructions for hinge placement.
Painting: After installation, prime the door if necessary, then apply two coats of your chosen paint.
Compatibility: This door is compatible with standard door frames and hardware. Check the dimensions before purchasing.
Care: Clean the door with a damp cloth. Avoid abrasive cleaners that may damage the surface.