Best current price£25.96from eBay
Shopping.co.uk recommended and popular offers
eBay£25.96Visit shop Rupes Bigfoot iBird Nano 50/70mm Grey UHS Polishing Foam Pads Pack of 4
Visit shop2 offers from £25.96 - £30.00
View price history by clicking the chart icon.
The Rupes Bigfoot UHS Polishing Foam Pads are designed for professional detailers and automotive enthusiasts who need to tackle hard, scratch-resistant clear coats and oxidized surfaces. These pads offer an exceptional balance of cutting power and finishing clarity when paired with the UHS polishing system, though they are specifically engineered for high-durability surfaces and may be too aggressive for soft or delicate paint finishes.
| Model Part Number | POLISHING FOAM UHS 50/70 mm 4 pcs |
|---|---|
| Brand | RUPES |
No, they are specifically formulated for hard, scratch-resistant clear coats and may be too aggressive for soft paint systems.
While they can be used with other compounds, they are optimized for the Rupes UHS system to provide the best balance of cut and finish.
It is recommended to clean the pad surface after every 2-3 panels or whenever you notice a buildup of residue.
No, machine washing can damage the foam cell structure; manual cleaning with warm water and mild soap is best.
These 50/70 mm pads are designed to fit a 50 mm (2-inch) backing plate.
Replace the pad if you notice tears in the foam, loss of shape, or if the foam becomes permanently compressed and loses its 'rebound' capability.
Ensure the pad is perfectly centered on the backing plate and reduce the pressure applied to the polisher.
Clean the pad surface more frequently and apply a small mist of pad conditioner or a tiny amount of fresh compound.
Avoid contact with sharp trim edges or emblems; ensure the backing plate is not larger than the foam base.
To set up these pads, align the center of the 50/70 mm foam backing with the center of your 50 mm (2-inch) backing plate to ensure even weight distribution and minimal vibration. These pads are intended for use with Rupes Bigfoot orbital polishers. For care, it is essential to clean the pads after each section using a pad brush or compressed air to remove spent compound and paint residue. Hand wash with a dedicated pad cleaning solution and warm water, then allow them to air dry completely in a clean, dust-free environment before their next use. Do not machine wash or use a high-heat dryer, as this will compromise the structural integrity of the foam.
