Best current price£24.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£24.99Visit shop B&Q - 12 X 260Ml High Power Instant Grab Interior Adhesive For Diy Mounting & Repair Jobs
Visit shop2 offers from £24.99 - £25.50
View price history by clicking the chart icon.
This high-strength grab adhesive from STORM TRADING GROUP is designed for indoor DIYers and professionals seeking a faster, cleaner, and mess-free alternative to screws and nails for decorative projects. Its key benefit is an instant, powerful bond that secures items like coving, dado rails, and skirting boards immediately, eliminating the need for drilling or clamps. A potential caveat is that it is specifically formulated for interior use only and may not be suitable for all materials or heavy-duty structural applications.
| Brand | STORM TRADING GROUP |
|---|
No, this adhesive is specifically formulated for interior use only and is not designed to withstand outdoor conditions.
While it provides an instant grab, full curing typically takes 24-48 hours, depending on temperature, humidity, and bead size. Avoid disturbing the bonded items during this period.
Yes, most paints are compatible with the cured adhesive. However, it is recommended to test on a small area first.
When stored correctly in its original, sealed packaging in a cool, dry place, the adhesive typically has a shelf life of 12 months.
Wipe away wet adhesive immediately with a damp cloth. Cured adhesive is difficult to remove and may require mechanical means or a specific solvent, depending on the surface.
It is not recommended for bonding mirrors directly, as the chemicals in some adhesives can react with mirror backing over time, causing discoloration or damage. Always check the mirror manufacturer's recommendations.
This adhesive may damage or melt certain types of foam or polystyrene. It is advisable to test on a small, inconspicuous area first or consult the foam manufacturer's guidelines.
Ensure the nozzle is cut correctly and the cartridge is properly seated in the applicator gun. Check for blockages in the nozzle.
Verify that both surfaces are clean, dry, and free from dust or grease. Ensure sufficient adhesive was applied and surfaces were pressed together firmly.
Apply a controlled bead of adhesive. If necessary, trim any excess immediately with a damp cloth before it cures. Ensure items are not over-pressed.
The instant grab nature means repositioning must be done immediately after application. Once the initial bond has set, significant force may be required, potentially damaging the item or surface.
Setup: Ensure surfaces to be bonded are clean, dry, and free from dust, grease, and loose material. For optimal adhesion, surfaces should be sound. Cut the nozzle to the desired bead size. Apply adhesive to one surface in a zig-zag or dotted pattern. For lighter items, press firmly into place immediately. For heavier items, hold in position for a few seconds until the initial grab takes effect.
Compatibility: This adhesive is designed for bonding porous and non-porous interior building materials such as wood, plaster, plasterboard, masonry, concrete, brick, and some plastics. It is not recommended for use on polyethylene, polypropylene, Teflon, or bitumen. Always test on a small, inconspicuous area if unsure.
Care: Store the adhesive in its original container in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the nozzle is sealed after use to prevent drying. Clean up any excess wet adhesive immediately with a damp cloth. Cured adhesive may be difficult to remove.
