U-Pol Weld Through Primer - Bronze
Best current price£33.43from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£33.43Visit shop 3 x U-Pol WELD#2 Weld Through Copper Rich Zinc Primer Spray 450ml Aerosol UPol
Visit shopeBay£33.43Visit shop All Offers
2 offers from £33.43 - £36.35
View price history by clicking the chart icon.
eBay3 x U-Pol WELD#2 Weld Through Copper Rich Zinc Primer Spray 450ml Aerosol UPol
Free delivery in 1–3 days
£33.43
Visit shop
OnBuy.com3 X U-Pol Weld#2 Weld Through Copper Rich Zinc Primer Spray 450Ml Aerosol Upol 5060859872727
Free delivery in 1–3 days
£36.35
Visit shop
Product Information
Full details
The U-Pol WELD #2 Copper is a high-adhesion, zinc-rich weld-through primer designed for automotive and industrial professionals who require superior corrosion protection without compromising the integrity of their welds. It serves as an essential pre-welding application to ensure maximum electrical conductivity while preventing rust in hidden seams and joints, though users must note that it requires proper surface preparation and ventilation during the application process to achieve optimal results.
All features
| Colour | Bronze |
|---|---|
| Model Part Number | WELD#2 |
| Brand | U-Pol |
Extended Product Information
FAQs
Can I paint over this primer?
Yes, once the welding is complete, you can prime and paint over the area using standard automotive refinishing systems.
Do I need to remove the primer before welding?
No, that is the primary benefit of this product; it is designed to be welded through while maintaining conductivity.
Is this suitable for outdoor metal structures?
Yes, its zinc-rich formula makes it excellent for outdoor metalwork, provided it is covered with an appropriate topcoat for UV protection.
How many coats should I apply?
Apply one to two thin, even coats to provide sufficient coverage without excessive buildup.
What is the primary difference between WELD #2 and standard primers?
Standard primers are often insulating and can cause poor weld quality or weld defects; WELD #2 is conductive and specifically engineered for joinery.
Troubleshooting
Weld bead is porous or bubbling
The primer was likely applied too thickly or not allowed to dry fully. Ensure a thin, even coat and allow for complete solvent evaporation.
Primer peeling or flaking after application
This is usually due to inadequate surface preparation. Sand the area thoroughly to create a profile and degrease before reapplying.
Nozzle is clogged and not spraying
Invert the can and spray until clear, or remove the nozzle and clean it with a solvent-based cleaner.
Pros and Cons
Pros
- Excellent electrical conductivity for cleaner welds
- High zinc content provides industry-leading rust prevention
- Strong adhesion to clean metal surfaces
- Ideal for hidden seams and overlapping metal joints
- Reliable for both automotive and industrial applications
Cons
- Requires thorough surface preparation (sanding/degreasing) for best results
- Application area must be well-ventilated due to chemical vapors
- Not intended for use as a final topcoat paint finish
Setup, Compatibility & Care
To ensure peak performance, surfaces must be cleaned of all grease, wax, and rust using a high-quality degreaser. For best adhesion, scuff the surface with medium-grit sandpaper before application. Shake the container vigorously for at least two minutes before use to ensure the zinc solids are evenly suspended. Apply in thin, light coats to avoid excessive buildup, which could interfere with the arc. Store the product in a cool, dry place away from direct sunlight, and always invert the canister and spray for a few seconds after each use to clear the nozzle and prevent clogging.