Best current price£18.98from Blueperry agriculture (UK)
Shopping.co.uk recommended and popular offers
Blueperry agriculture (UK)£18.98Visit shop Trimmer head Tap and Go head FGP008256
Visit shop1 offer from £18.98
View price history by clicking the chart icon.
The Rocwood Bump Feed Head (02571B) is designed for landscaping enthusiasts and professional gardeners who need a reliable, high-quality replacement head for their strimmers and brushcutters. Its primary benefit is the efficient bump-feed mechanism that allows for continuous line advancement without stopping work, though users should be aware that it requires transferring the adaptor bolt from their existing trimmer assembly for proper installation.
| Model Part Number | 02571B |
|---|---|
| Brand | RocwooD |
The head comes pre-loaded with 2.4mm diameter strimmer line.
It is designed for many standard brushcutters, but you must have your existing adaptor bolt to attach it to your specific machine's drive shaft.
Remove the spool cap, cut a fresh length of 2.4mm line, and wind it according to the directional arrows indicated on the spool body.
Clean the area around the base plate and ensure there is no compacted dirt preventing the spring from compressing.
No, this product requires you to reuse the adaptor bolt from your existing trimmer head.
Check if the internal spring is missing or stuck, and ensure the line is not welded together inside the spool due to heat.
Verify the unit is tightened securely to the spindle and check that the line is wound evenly on both sides of the spool.
To install this unit, first ensure your strimmer is turned off and the spark plug wire is disconnected. You must unscrew your existing head and retain the original adaptor bolt or nut. Align the Rocwood head onto the spindle of your strimmer, securing it firmly using the bolt salvaged from your previous head. For maintenance, periodically remove the spool cap to clean out grass clippings and debris that may accumulate inside the housing. If the line breaks off inside the head, disassemble the unit to ensure the line is fed correctly through the eyelets before reseating the cap. Avoid tapping the head on hard surfaces like concrete or stone, as this can prematurely wear the plastic housing.
