T-Cut Color Fast Scratch Remover - Light Red - 500ml

Yes, it is compatible with most standard glossy red finishes, including metallics, provided the lacquer is intact.

No. T-Cut Color Fast is designed for surface-level scratches and swirl marks. Deep scratches reaching the primer will require professional repair.

It is intended as a periodic restorative treatment, typically every 3 to 6 months depending on environmental exposure.

While the product contains protective SiO2 elements, you can apply a pure wax over it for extra depth if desired, though it is not strictly necessary.

The pigmented formula is designed to bond to paint; rinse the fabric immediately with cold water and treat with a stain remover, though permanent staining is possible.

It is formulated for manual application. While some use it with soft foam pads, we recommend hand application to maintain better control over the pigment distribution.

You likely applied too much product or let it dry for too long. Use a slightly damp clean cloth to re-soften the residue before buffing.

Ensure you are using a clean, dry microfiber cloth. If streaks persist, the panel may have been too hot during application; perform the process in the shade.

Immediately wipe away with a damp cloth or an all-purpose automotive cleaner. The sooner you attend to it, the easier the removal.