Best current price£96.55from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£96.55Visit shop Orxplus Tools 2 In 1 Innerouter Reamer Pipe And Tubing Chamfer Tool For Od 118 To 314 Id 1116To 338 757350689446
Visit shop1 offer from £96.55
View price history by clicking the chart icon.
This ORX PLUS TOOLS 2 in 1 Inner Outer Reamer is designed for plumbers, contractors, and DIY enthusiasts who need to efficiently deburr plastic and soft metal pipes. Its key benefit is the unique dual-action design that allows for both inside and outside pipe deburring with a simple flip, saving time and tool changes. A crucial caveat is that it should only be used with standard drills in a clockwise direction and not with impact or hammer drivers.
| Model Part Number | PO-051-SK7 |
|---|---|
| Brand | ORX PLUS TOOLS |
Yes, as long as your cordless drill is a standard drill/driver (not an impact driver or hammer drill) and can be set to rotate clockwise.
The tool can handle Outer Diameter (OD) sizes up to 3-1/4 inches.
It is effective on plastic pipes like PVC, CPVC, CP, PE, PEX, ABS, and soft metals such as Copper, Aluminum, and Brass.
No, the tool is designed for and must be operated ONLY in a Clockwise Direction.
Immediately stop the drill and carefully remove the tool from the pipe. Clean the reamer blades thoroughly with a brush or cloth before resuming use.
It is suitable for soft metals like Copper, Aluminum, and Brass. It is not designed for hard metals such as steel.
Please refer to the product packaging or manufacturer's website for specific warranty information, as it is not detailed in the provided product description.
The provided product description does not mention a storage case. It is recommended to store the tool properly to maintain its condition.
Ensure the drill is rotating clockwise. Check if the correct side of the tool (inner or outer) is being used for the specific task. Verify the pipe material and size are within the tool's compatibility range.
Remove the tool from the pipe and clean any accumulated debris. Ensure you are not forcing the tool and that the drill is set to a moderate speed. Do not use excessive pressure.
Immediately stop operation. This could indicate improper use, such as using an impact driver or incorrect rotation. Ensure the tool is securely chucked and that the drill is functioning correctly.
Avoid using the tool on materials harder than specified (e.g., steel pipes). Ensure the tool is clean and free from hardened debris that could chip the edges. Do not use the tool if edges are significantly damaged, as this can affect performance and safety.
Setup:
Compatibility:
Care:
