Best current price£149.35from eBay
Shopping.co.uk recommended and popular offers
eBay£149.35Visit shop Tamiya 300058723 - 1:10 RC Fiat 131 Abarth Oil Fiat MF-01X - New
Visit shopeBay£179.99Visit shop Tamiya RC 58723 1:10 Fiat 131 Abarth Rally MF-01X RC Model Car Kit 4WD Olio Fiat
Visit shop5 offers from £149.35 - £179.99
View price history by clicking the chart icon.
The Tamiya Fiat 131 Abarth Rally Olio Fiat MF-01X is a 1:10 scale R/C model assembly kit for hobbyists looking to build a replica of a legendary rally car. Its key benefit lies in its faithful recreation of the iconic 1970s rally car's design on a beginner-friendly, durable 4WD chassis. A potential caveat for absolute beginners is that it is an assembly kit requiring time and patience to build.
| Series | MF-01X |
|---|---|
| Model Part Number | 58723-A |
| Brand | Tamiya |
No, this is an assembly kit. It requires you to build the model and supply your own radio transmitter, receiver, battery, and charger.
The MF-01X chassis typically supports standard 7.2V NiMH battery packs or compatible LiPo batteries. Please refer to the product manual for exact specifications and recommended types.
Assembly time can vary depending on experience level. For beginners, it might take several hours over a weekend, while experienced modelers may complete it faster.
While possible, the included ESC is designed for brushed motors. Upgrading to a brushless motor would likely require a compatible brushless ESC as well.
This is a 1:10 scale model.
Yes, the kit includes decals to replicate the iconic Olio Fiat racing livery.
The assembled model measures approximately 400mm in length, 180mm in width, and 132mm in height, with a wheelbase of 239mm.
Check that the battery is fully charged and correctly connected to the ESC. Ensure the ESC is properly bound to the radio transmitter and that all servo connections are secure.
Verify the steering servo is correctly connected to the receiver and that the servo saver is not too tight. Check servo linkage for any binding or obstructions. Ensure the transmitter's steering trim is centered.
Reduce run times or allow for cooling periods between runs. Check for any binding in the drivetrain or excessive load on the motor. Ensure the gearing is appropriate for the conditions.
Adjust the steering trim on your transmitter. Check for any damage or uneven wear on the tires. Inspect the suspension and alignment for any kinks or damage.
Setup: This is an assembly kit, requiring dedicated time and tools for construction. Prior to assembly, ensure you have a clean workspace. Follow the included detailed illustrated instructions carefully, paying attention to the order of operations. Once assembled, you will need to install your own compatible radio control system (transmitter and receiver), a battery pack (e.g., NiMH or LiPo, check manual for compatibility), and a suitable charger.
Compatibility: The MF-01X chassis is designed to work with Tamiya's range of R/C components. The electronic speed controller (ESC) is included and designed for the 540 brushed motor. Ensure any additional electronics, batteries, and chargers purchased are compatible with standard R/C car specifications and the voltage requirements specified in the manual.
Care: After each use, it is recommended to clean the model. Gently wipe down the polycarbonate body with a damp cloth. Check the chassis for dirt and debris, especially around the drivetrain and suspension components, and clean them as needed. Inspect tires for wear and ensure they are securely attached. Store the model in a dry, cool place away from direct sunlight to preserve the body's finish and electronic components.
