Best current price£7.97from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£7.97Visit shop Iec Splitter Cable C14 Plug To 2 X C13 Socket Y Lead 2M (1M+1M) Black 5055383461578
Visit shop
B&Q£10.81Visit shop B&Q - Iec Splitter Cable C14 Plug To 2 X C13 Socket Y Lead 2M (1M+1M)
Visit shop4 offers from £7.97 - £10.81
View price history by clicking the chart icon.
This kenable IEC splitter cable is designed for users needing to power multiple devices from a single C14 outlet, such as in office environments or for computer systems. Its key benefit is expanding one power input into two outputs, simplifying cable management and setup. A caveat is its 10A rating, which should not be exceeded. The cable features a C14 plug to two C13 sockets, a total length of 2 meters (with a 1-meter main segment and two 1-meter leads), a 240V AC voltage rating, and a 1.0mm² core size.
| Model Part Number | 006157 |
|---|---|
| Brand | kenable |
This splitter cable is rated for a maximum of 10 Amps (10A) at 240V AC. Ensure the combined power consumption of the devices connected does not exceed this limit.
It is not recommended for two high-demand devices. The 10A limit is suitable for standard office equipment or a mix of one moderately demanding device and several low-demand devices. Always check the power requirements of your equipment.
The cable has a total length of 2 meters. This consists of a 1-meter main segment, from which two separate 1-meter leads extend to the C13 sockets.
This cable is designed for typical office and computer systems. For heavy-duty industrial equipment, a higher-rated power cable may be necessary. Always consult the specifications of your equipment.
C14 and C13 are standard connector types defined by the IEC (International Electrotechnical Commission). A C14 is a male plug that typically goes into a C13 female socket. This cable adapts one C14 input to provide two C13 outputs.
According to the product information, this specific model (006157) is available in black.
Ensure the C14 plug is fully inserted into the power source. Verify the power source is active. Check that the total power draw of the connected devices does not exceed the 10A limit. Inspect the cable for any visible damage.
Try swapping the connections to the C13 sockets. Test each C13 socket with a known working device. If one socket consistently fails, the cable may be faulty.
This indicates the connected devices are drawing too much power and likely exceeding the 10A rating. Immediately disconnect devices and ensure the total load is within specifications. Overheating can damage the cable and connected equipment.
Setup:
Compatibility:
Care:
