Tap Magician Tap Valves - 1/2" BSP 20 Teeth
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for homeowners and plumbers needing to replace or repair leaking taps. The Tap Magician Tap Valves offer a reliable solution for Rotaflow taps manufactured after 2012, providing a durable compression valve with 20 splines. A key caveat is ensuring your tap is compatible, as these are specifically designed for post-2012 Rotaflow models.
All features
| Model Part Number | SP3768 |
|---|---|
| Brand | Tap Magician |
Extended Product Information
FAQs
What type of taps are these valves compatible with?
These valves are specifically designed for Rotaflow taps manufactured after the year 2012, featuring 20 splines on the spindle.
How do I know if I have 20 splines?
You can usually see the splines on the valve spindle (the part the handle attaches to). Count the small ridges; if there are 20, it's compatible. Sometimes, you may need to remove the tap handle to inspect the spindle.
What does 'compression valve' mean?
A compression valve works by compressing a washer against a valve seat to stop the flow of water. This is a traditional and reliable valve mechanism.
How tight should I screw in the tap valve?
Tighten the valve until it is snug and securely in place. Avoid overtightening, as this can damage the valve, the tap body, or make the handle difficult to turn.
What is the warranty period for these tap valves?
The product comes with a 12-month warranty from the manufacturer.
Can these valves be used in taps manufactured before 2012?
No, these valves are specifically designed for Rotaflow taps made after 2012. Earlier models may have different specifications.
How do I turn off the tap with this valve?
These valves open anti-clockwise. To turn off the tap, rotate the handle clockwise until it stops.
Troubleshooting
Tap still drips after installation
Ensure the valve was not overtightened and the valve seat inside the tap body is clean and free from debris or damage. If the seat is damaged, the entire tap may need replacement.
Tap handle is difficult to turn
Check that the valve is correctly aligned and fully seated. Ensure the tap handle is properly attached to the valve's splines. Do not force the handle; this could damage the valve or handle.
Water leaks around the valve stem when the tap is on
This usually indicates the packing nut (if applicable) or the valve body itself is not sealed correctly. Ensure the valve is tightened properly within the tap body.
Product does not fit the tap
Double-check that your tap is a Rotaflow model manufactured after 2012 and has 20 splines. If it does not match these specifications, this valve will not be compatible.
Pros and Cons
Pros
- Designed for specific Rotaflow tap models, ensuring a good fit.
- 20 splines provide a secure and accurate connection for the tap handle.
- Compression valve mechanism is straightforward and reliable.
- Includes a 12-month warranty for added assurance.
- Helps resolve common tap issues like drips and leaks.
Cons
- Limited compatibility - only suitable for Rotaflow taps made after 2012.
- Requires basic DIY or plumbing knowledge for installation.
- Not suitable for taps with different spline counts or valve types.
Setup, Compatibility & Care
Compatibility Check:
Before purchasing, verify that your tap is a Rotaflow model manufactured after 2012. Confirm that the tap handle spindle has 20 splines (the small ridges that engage with the handle). These valves are designed for 1/2" BSP connections and operate anti-clockwise.
Installation:
- Turn off the water supply to the tap at the mains or isolation valve.
- Remove the tap handle (usually involves a decorative cap and a screw).
- Using an appropriate wrench, unscrew the old tap valve.
- Clean the valve seat area within the tap body.
- Screw in the new Tap Magician Tap Valve, ensuring it is snug but not overtightened.
- Reassemble the tap handle.
- Turn the water supply back on slowly and check for leaks.
Care:
These tap valves are part of your plumbing system and require no specific maintenance beyond ensuring the tap itself is clean. Avoid using abrasive cleaners on the tap exterior that could potentially damage components. If the tap begins to drip again, it may indicate wear on the valve seat or the new valve requires adjustment.