Best current price£275.33from City Plumbing GB
Shopping.co.uk recommended and popular offers
City Plumbing GB£275.33Visit shop Stelrad Softline 600Mm X 1000Mm Compact Triple Panel Radiator K3
Visit shop1 offer from £275.33
View price history by clicking the chart icon.
The Stelrad Softline Compact K3 Steel Panel Radiator is designed for homeowners seeking efficient heating solutions, particularly for spaces needing supplemental warmth from low-temperature systems or where wall space is limited. Its key benefit is providing significant heat output with a compact, stylish design. A potential caveat is its suitability primarily for lower-temperature renewable systems, which might influence performance with older, high-temperature boilers. This radiator offers a blend of functional heating and aesthetic appeal with its softline design, integrated grilles, and a durable white finish.
| Colour | White |
|---|---|
| Model Part Number | 80603310 |
| Brand | Stelrad |
The Stelrad Softline Compact K3 Steel Panel Radiator comes with a 15-year manufacturer's warranty.
It is primarily designed for low-temperature heating systems, such as those powered by heat pumps or condensing boilers. While it can be used with higher temperature systems, its optimal efficiency is achieved at lower temperatures.
Yes, the radiator can be painted. However, only use water-based emulsion paint. Ensure the radiator is clean and dry before painting, and avoid painting the convection fins or top grille if possible, as this can affect performance. Always check manufacturer recommendations before painting.
The model described is 600mm high and 1000mm wide.
Dust regularly with a soft, dry cloth. For cleaning, use a damp cloth with mild soap and water, then dry thoroughly. Avoid abrasive cleaners.
The heat output for the 600 x 1000mm model is approximately 8151 Btu/hr.
Typically, mounting brackets are supplied with the radiator, but it is advisable to confirm this with your supplier at the time of purchase.
Bleed the radiator to release trapped air. If the issue persists, check for blockages in the pipework or ensure the system flow is adequate, especially if using a low-temperature system.
Check that all pipe fittings and valve connections are securely tightened. If leaks persist, replace any worn seals or O-rings.
Ensure the radiator is compatible with the system's operating temperature. For low-temperature systems, verify that the boiler or heat source is functioning correctly and providing sufficient flow rate and temperature. Clean any dust or debris that may be obstructing heat emission.
Gurgling noises usually indicate trapped air, which can be resolved by bleeding the radiator. Knocking or pinging sounds might suggest expansion/contraction issues or flow problems; consult a professional heating engineer.
Setup: Installation typically involves standard radiator mounting brackets and pipe connections. Ensure the system is flushed before installation to remove any debris. For low-temperature systems, verify that the system's flow and return temperatures are within the radiator's optimal operating range (typically below 55°C). Consult the installation manual for specific pipework and valve recommendations.
Compatibility: This radiator is designed for use with closed central heating systems, primarily those operating at lower temperatures (e.g., compatible with heat pumps, condensing boilers, and solar thermal systems). Ensure your system's output is suitable for the radiator's heat output specifications. It uses standard radiator connections, but always confirm with your installer.
Care: To maintain the radiator's appearance and performance, regularly dust with a soft, dry cloth. For stubborn marks, use a slightly damp cloth and mild detergent, then dry thoroughly. Avoid abrasive cleaners or solvents. Periodically check bleed valves and ensure the system is properly pressurized.
