This ADDON Ethernet Adapter Card features a 10/100 Mbps Fast Ethernet PCI connection and supports ...This ADDON Ethernet Adapter Card features a 10/100 Mbps Fast Ethernet PCI connection and supports Cat5e cable types. It is compatible with a wide range of operating systems including Microsoft Windows NT, 95, 98, 2000, ME, XP, 7, 8, 8.1, Novell Netware, SCO Unix, and Linux. The card complies with ACPI specifications and supports standards such as IEEE 802.3x, IEEE802.3u 100 BASE-TX, IEEE 802.3 10 BASE-T, and PCI local bus 2.1, 2.2. It includes advanced power management features and is approved by FCC Class B, CE, and VCCI Class B. The chip used is RTL8139D / 65280S1.
This ADDON Ethernet Adapter Card (NIC110V) is designed for users needing a reliable wired network connection for older desktop systems with PCI slots. Its key benefit is providing stable 10/100 Mbps Fast Ethernet connectivity. A potential caveat is its reliance on a PCI slot, which may not be present in modern laptops or some newer desktops.
All features
Model Part Number
NIC110V
Brand
ADDON
Extended Product Information
FAQs
What is the maximum speed this Ethernet card supports?
This card supports Fast Ethernet speeds of up to 100 Mbps.
Can I use this card in a modern laptop?
No, this card uses a PCI interface and is designed for desktop computers with available PCI slots. It is not compatible with laptops.
Do I need to install drivers?
Yes, driver installation is typically required, especially for older operating systems. Your OS might detect it automatically, or you may need to install them from a provided CD or download.
What type of Ethernet cable should I use?
The card supports Cat5e cable types for optimal performance.
Is this card compatible with Windows 10?
While not explicitly listed for Windows 10, it may work with basic functionality on Windows 7/8.1 drivers, though official support might be limited. Compatibility is best confirmed with the manufacturer.
What are the ACPI specifications mentioned?
ACPI (Advanced Configuration and Power Interface) specifications relate to how the hardware communicates power management features with the operating system.
Where can I find drivers if I lost the CD?
You would typically need to visit the ADDON manufacturer's website and search for support or downloads for the NIC110V model.
Troubleshooting
No network connection detected after installation.
Ensure the card is properly seated in the PCI slot. Verify that the correct drivers are installed for your operating system. Check the Ethernet cable connection at both the card and the network device (router/switch).
Slow network speeds.
Confirm that the network cable is Cat5e or higher and is not damaged. Check that the card is configured for 100 Mbps in the device manager settings. Ensure that the network on the other end (router/switch) also supports 100 Mbps.
Driver installation fails.
Download the latest drivers specifically for your operating system from the ADDON support website. Temporarily disable antivirus software during driver installation. Ensure you have administrator privileges.
The computer does not boot after installing the card.
Remove the card and see if the system boots normally. If it does, the card might be faulty or not fully seated. Try a different PCI slot if available.
Pros and Cons
Pros
Provides a cost-effective way to add or replace Ethernet functionality on older PCs.
Broad operating system support ensures compatibility with a wide range of legacy systems.
Plug-and-play installation for supported operating systems.
Reliable wired connection for stable network performance.
Includes power management features for energy efficiency.
Cons
Requires an available PCI slot, limiting use in modern computers or laptops.
Limited to 10/100 Mbps speeds, which may be insufficient for high-bandwidth applications.
Driver installation might be necessary for some older operating systems.
No support for Gigabit Ethernet speeds.
Setup, Compatibility & Care
Setup:
Power Off: Ensure your computer is completely powered off and unplugged.
Open Case: Open the computer case to access the motherboard.
Insert Card: Locate an available PCI slot (typically a long, narrow slot) and carefully insert the ADDON Ethernet Adapter Card until it is securely seated.
Close Case: Close the computer case.
Power On: Power on the computer.
Driver Installation: Follow the operating system's prompts to install the necessary drivers. Drivers are usually provided on a CD or can be downloaded from the manufacturer's website if needed for older OS versions.
Compatibility:
Operating Systems: Microsoft Windows NT, 95, 98, 2000, ME, XP, 7, 8, 8.1, Novell Netware, SCO Unix, Linux.
Hardware: Requires an available PCI slot (2.1 or 2.2).
Cables: Compatible with Cat5e (or better) Ethernet cables with an RJ45 connector.
Care:
Dusting: Periodically clean the card and its surroundings with compressed air to prevent dust buildup.
Handling: Avoid touching the gold contacts on the PCI connector when installing or removing the card.
Environment: Operate the card in a well-ventilated area and avoid exposure to excessive heat, moisture, or static electricity.