Bahco Coping Saw and Fretsaw Set - BAH301_302
Best current price£25.25from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£25.25Visit shop B&Q - 301 Coping Saw 14 Tpi 165mm 6 1/2 Inch Saw And 302 Fretsaw 260mm
Visit shopB&Q£25.25Visit shop One Offer
1 offer from £25.25
View price history by clicking the chart icon.
B&QB&Q - 301 Coping Saw 14 Tpi 165mm 6 1/2 Inch Saw And 302 Fretsaw 260mm
Free delivery in 1–3 days
£25.25
Visit shop
Product Information
Full details
The Bahco Coping Saw and Fretsaw Set (BAH301_302) is an essential toolkit for woodworkers, hobbyists, and crafters who need precision when cutting intricate shapes and curves. This dual-tool set provides the versatility to handle everything from plywood to glass fiber with ease, though users should note that the manual tensioning systems require a brief learning curve to master for optimal blade rigidity.
All features
| Model Part Number | BAH301_302 |
|---|---|
| Brand | Bahco |
Extended Product Information
FAQs
Can I use these saws for metal cutting?
These saws are specifically designed for wood, plastics, and fiberboard. They are not suitable for cutting metal.
Which direction should the teeth point?
For these saws, the teeth should point toward the handle so that the cutting action occurs on the pull stroke.
Is the fretsaw blade adjustable?
The fretsaw is primarily for fixed-position precision; for rotating blade tasks, the coping saw is the appropriate tool.
How do I replace a dull blade?
Twist the handle to release tension, remove the pins from the holder, insert a new blade, and re-tension.
Can this set handle thick lumber?
These saws are designed for thin stock. They are not intended for thick dimensional lumber or heavy-duty construction.
Troubleshooting
Blade snaps frequently during use
Reduce side pressure and ensure the blade is pulling through the wood rather than being pushed.
Cut edges are rough or splintered
Ensure the blade is fully tensioned; a loose blade will vibrate and tear wood fibers instead of slicing them.
Blade keeps twisting in the holder
Check the set screws or tensioning mechanism to ensure they are firmly locked in place after rotating the blade.
Pros and Cons
Pros
- High level of control for intricate cuts
- Blades rotate 360 degrees for versatile angles
- Includes both coping and fretsaw for varied tasks
- Ergonomic beech wood handles reduce hand fatigue
- Robust steel frames ensure long-term durability
Cons
- Manual tensioning requires practice to get right
- Blades may snap if forced or twisted incorrectly
- Limited throat depth for very large workpieces
Setup, Compatibility & Care
To set up the coping saw, insert the pins of the blade into the holders at each end of the frame, ensuring the teeth are pointing toward the handle for a pull-stroke cut. Tighten the handle until the blade sings when plucked, indicating proper tension. For maintenance, keep the steel frames free of moisture to prevent oxidation and occasionally rub a light coat of paste wax on the wooden handles to preserve the finish. If you notice the blade drifting during a cut, check the pin-seat alignment to ensure the blade is not twisted within the clamps.