Best current price£77.62from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£77.62Visit shop Trend Routabout Cutter 18Mm Floor 1/4In Shank Pk 1 Rbt/Cut/1
Visit shop1 offer from £77.62
View price history by clicking the chart icon.
The Trend Routabout Router Cutter is a specialized tool engineered for professional woodworkers and flooring contractors who demand precision when working with 18mm flooring material. Its primary benefit is the ability to achieve clean, accurate cuts that ensure seamless fitment, though users must be aware that it requires a router equipped with a standard 1/4-inch collet and proper feed rates to maintain tool longevity.
| Model Part Number | RBT/CUT/1 |
|---|---|
| Brand | Trend |
While designed for 18mm flooring, it can be used on other woods, but the 18mm diameter is fixed and optimized for specific flooring joint standards.
No, this is a 1/4-inch shank bit. You would need a 1/2-inch to 1/4-inch collet reducer adapter to use it in a 1/2-inch router.
The maximum cutting depth for this specific tool is 24mm.
It is recommended to have professional sharpening services handle this to maintain the specific geometry, or replace the bit if the carbide edges are severely dulled.
This bit is primarily for trimming and edge profiling; always ensure your router is capable of safe plunge operation if you intend to start cuts in the middle of a board.
Increase your feed rate or ensure the router speed is set to the appropriate RPM for the material density.
Ensure the collet is clean of debris and tightened fully; check if the collet itself is worn.
Check that the bit is seated correctly and verify that the router base is flat against the workpiece.
To set up, insert the 1/4-inch shank into your router collet, ensuring at least three-quarters of the shank length is inserted for safety. Always tighten the collet securely. Compatibility is restricted to routers capable of accepting 1/4-inch shank bits. After use, inspect the cutter for resin buildup, which can be removed with a specialized resin cleaner. Store the bit in a dry, protective case when not in use to maintain the sharpness of the cutting edges and prevent rust.
