Best current price£2.51from City Plumbing GB
Shopping.co.uk recommended and popular offers
City Plumbing GB£2.51Visit shop Plumbright Black Solvent Weld Waste 92.5 Degree Swept Bend 50Mm Pwsb50b
Visit shop1 offer from £2.51
View price history by clicking the chart icon.
This guide is for plumbers and DIY enthusiasts needing to understand and effectively use the Davant Solvent Waste 92.5 Swept Bend. It offers a cost-effective solution for plumbing applications, especially where space is limited, thanks to its 92.5-degree sweep. However, users should ensure they have the correct solvent cement for secure joining. This guide covers key features, practical use, setup, care, and troubleshooting to help you make the most of this product.
| Model Part Number | PWSB50B |
|---|---|
| Brand | Davant |
Use a solvent cement specifically designed for PVC or ABS plastic pipes. Always follow the cement manufacturer's instructions.
This bend is designed for use with PVC or ABS plastic pipes. It may not be compatible with other materials.
Allow the solvent cement to dry and fully cure according to the manufacturer's instructions, typically 24 hours, before testing the connection.
The bend has a 92.5-degree angle.
Once solvent cement is used, the connection is permanent. It is not recommended to reuse the bend after disassembly.
Use warm, soapy water and a soft cloth or brush to clean the pipes. Avoid using abrasive cleaners or tools that could damage the plastic.
Ensure sufficient solvent cement was applied. If the leak persists, disassemble the joint, reapply cement, and reassemble. Check for any cracks in the bend.
Ensure the pipe and the bend socket are clean. Use a chamfer tool to slightly bevel the edge of the pipe for easier insertion. Apply a generous amount of solvent cement.
Check for any blockages within the pipe or bend. Ensure the bend is correctly oriented for optimal water flow. Check for any kinks in connected pipes.
