Shopping.co.uk

Cost Wise Mdpe Water Pipe Valves - 20mm Compression - 1/2" Bsp Female

Cost Wise Mdpe Water Pipe Valves - 20mm Compression - 1/2" Bsp Female

A plastic MDPE compression valve with either a male or female 1/2" BSP thread to 20mm compression ...

Best current price£7.99from B&Q

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
B&Q£7.99Visit shop

B&Q - Mdpe Water Pipe Valves Compression-Male/female Bsp Thread (20mm Compression1/2" Bsp Female)

Visit shop

All Offers

4 offers from £7.99 - £11.99

View price history by clicking the chart icon.

B&QB&Q - Mdpe Water Pipe Valves Compression-Male/female Bsp Thread (20mm Compression1/2" Bsp Female)
Free delivery in 1–3 days
£7.99
Visit shop

Product Information

Full details

This guide is for plumbers, DIY enthusiasts, and system designers needing a reliable water flow control solution. The Cost Wise MDPE Compression Valve offers easy, tool-free installation and durable, corrosion-resistant performance for various water systems. While versatile, ensure you select the correct thread and compression size for your specific pipe.

All features

Model Part Numbermdpevm-f
BrandCost Wise

Extended Product Information

FAQs

What type of pipe is this valve compatible with?

This valve is specifically designed for use with MDPE (Medium Density Polyethylene) water pipes and features BSP threaded connections.

Do I need special tools to install this valve?

No, the compression fitting allows for installation without the need for special tools. Hand-tightening followed by a small wrench turn is usually sufficient.

What are the available sizes for this valve?

The valve is available in multiple combinations, including 1/2" BSP thread to 20mm compression, 3/4" thread to 25mm compression, and 1" thread to 32mm compression.

Can this valve be used for hot water systems?

This valve is generally intended for cold water applications. Check the product specifications or manufacturer for suitability with hot water systems.

How resistant is the plastic material to chemicals?

The MDPE material offers good resistance to common chemicals, corrosion, and UV radiation, making it suitable for various environmental conditions.

What is the maximum pressure rating for this valve?

Please refer to the specific product documentation or manufacturer's website for the exact pressure rating. Typical MDPE fittings are designed for standard domestic water pressures.

How do I ensure a watertight seal?

Ensure the MDPE pipe is cut cleanly and inserted fully. Tighten the compression nut firmly by hand and then a quarter turn with a wrench. Do not overtighten, as this can damage the pipe or fitting.

Troubleshooting

Valve is leaking after installation

Check that the compression nut is tightened sufficiently. Ensure the MDPE pipe is cut square and fully inserted into the valve body. Verify the ferrule is correctly positioned.

Difficulty connecting the pipe

Ensure the pipe end is clean and not deformed. If the pipe is stiff, warming it slightly may help ease insertion. Confirm you are using the correct valve size for the pipe diameter.

Handle is stiff or difficult to turn

Operate the valve fully open and closed a few times. Ensure no debris is obstructing the valve mechanism. Avoid forcing the handle.

Water flow is restricted even when valve is fully open

Check for blockages within the pipe or at the valve's inlet. Ensure the valve was installed in the correct orientation if there is a flow direction indicated.

Pros and Cons

Pros

  • Tool-free installation saves time and labor.
  • Resistant to corrosion, chemicals, and UV damage.
  • Suitable for a wide range of water system applications.
  • Available in multiple sizes for diverse plumbing needs.
  • Lightweight and easy to handle, ideal for DIY projects.
  • Provides a cost-effective plumbing solution.

Cons

  • Primarily designed for water systems; may not be suitable for all fluid types.
  • Plastic construction may be less resistant to extreme physical impact compared to metal valves.
  • Requires correct sizing for compatibility with specific MDPE pipes.
  • Manual operation means it needs to be physically turned to adjust flow.

Setup, Compatibility & Care

Setup:

  1. Ensure the MDPE pipe is clean and free from debris.
  2. Slide the compression nut and then the ferrule (olive) onto the end of the MDPE pipe.
  3. Insert the pipe fully into the valve body, ensuring it reaches the internal stop.
  4. Slide the ferrule down to the valve body.
  5. Tighten the compression nut securely by hand, then use a wrench for a final quarter-turn to ensure a watertight seal. Do not overtighten.

Compatibility:

  • This valve is designed for use with standard MDPE (Medium Density Polyethylene) water pipes.
  • Available sizes ensure compatibility with 20mm, 25mm, and 32mm MDPE pipes.
  • Ensure the BSP thread size (1/2", 3/4", or 1") matches your connecting fitting.

Care:

  • Periodically check the valve and its connections for leaks, especially after initial installation or significant temperature changes.
  • Clean the exterior with a damp cloth if necessary. Avoid using abrasive cleaning agents.
  • Ensure the valve is operated within its designed temperature and pressure limits.

Price History

DatePrice
Visit shop