Bailey LED G9 Glass Capsule - 3.7W - 2700K - 420lm
Best current price£5.76from Tameson UK
Best offers
Shopping.co.uk recommended and popular offers
Tameson UK£5.76Visit shop Bailey Led G9 Glass Capsule 3.7W 2700K 420Lm - 142760
Visit shopTameson UK£5.76Visit shop All Offers
2 offers from £5.76 - £7.53
View price history by clicking the chart icon.
Tameson UKBailey Led G9 Glass Capsule 3.7W 2700K 420Lm - 142760
Free delivery in 1–3 days
£5.76
Visit shop
Bailey White Led G9 Glass Dimmable 2.2W 250Lm 2700K Clear - 145773Free delivery in 1–3 days£7.53Visit shop →
Product Information
Full details
This guide is for individuals looking to upgrade their existing 230V halogen G9 fixtures to a more energy-efficient LED solution without compromising on the traditional aesthetic. The Bailey LED G9 Glass Capsule offers a significant energy saving, replacing a 36W halogen with just 3.7W while providing 420 lumens of warm light. A key caveat is its operating temperature range, which should be considered for installations in extreme environments.
All features
| Model Part Number | 142760 |
|---|---|
| Brand | Bailey |
Extended Product Information
FAQs
What is the power consumption of this LED?
This LED consumes 3.7W of power.
What is the light output in lumens?
It provides an output of 420 lumens.
What color temperature does this LED produce?
The LED produces a warm white light with a color temperature of 2700K.
Can I use this LED in an enclosed outdoor fixture?
While it operates within a wide temperature range, ensure the fixture provides adequate ventilation and protects the LED from direct moisture. Check the specific fixture's IP rating.
How does this compare to a 36W halogen bulb?
It directly replaces a 36W halogen, offering the same light output (420 lumens) but consuming only 3.7W, resulting in significant energy savings.
Is this LED dimmable?
The specific model 142760 is not explicitly stated as dimmable in the provided information. Please refer to product packaging or manufacturer's specifications for dimming capability. Note that other Bailey LED G9 variants might be dimmable.
What is the lifespan of this LED?
LEDs typically have a much longer lifespan than halogen bulbs. While specific hours are not provided, expect significantly more usage hours compared to traditional capsules.
Troubleshooting
LED does not light up
Ensure the power is on and the fixture is correctly wired. Try reseating the LED capsule in the socket. Verify that the circuit breaker has not tripped. Check if the LED is compatible with your fixture (230V G9).
Flickering light
Reseat the LED capsule firmly in the socket. If flickering persists, the fixture may have an incompatible dimmer switch or a faulty connection. Confirm the LED is not being used with a dimmer if it is not a dimmable variant.
Reduced brightness over time
This is uncommon with LEDs. If significant dimming occurs, ensure the operating temperature is within the specified range (-20°C to +40°C). If the issue persists, the LED may be faulty.
Pros and Cons
Pros
- Significant energy savings compared to halogen bulbs.
- Maintains the look and feel of traditional lighting.
- Provides ample brightness for general illumination.
- Easy installation as a direct replacement for G9 halogen bulbs.
- Suitable for a wide range of indoor environments due to its operating temperature range.
Cons
- May not be suitable for locations with temperatures consistently exceeding +40°C.
- As a capsule design, it might not fit all enclosed fixtures where heat dissipation is critical.
- LEDs are directional, which can alter light spread compared to omnidirectional halogens.
Setup, Compatibility & Care
Setup: To install, ensure the power is switched off at the mains. Carefully remove the old G9 halogen capsule by gently pulling it straight out of the socket. Insert the new Bailey LED G9 Glass Capsule by aligning the two pins with the corresponding holes in the socket and pushing it firmly until it is seated. Then, switch the power back on.
Compatibility: This LED replacement is designed for standard 230V G9 fixtures. It is not suitable for low-voltage systems or fixtures that require a different base type. Always check your existing fixture's specifications to ensure compatibility.
Care: Clean the LED capsule periodically with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as they can damage the glass and internal components. Ensure the fixture is cool before cleaning.