Outsunny Garden Shed Storage - Brown

No, a lock is not included with the shed. You will need to purchase a suitable padlock separately to secure the double sliding doors.

For safety and ease of installation, it is strongly recommended that two people assemble the Outsunny Garden Shed.

A foundation kit is included with the shed to help create a level and stable base. While this is sufficient for many installations, some users may opt to place the shed on a pre-existing concrete slab or a treated timber frame for additional stability.

The internal dimensions of the shed are approximately 203L x 117W x 185H cm, providing ample space for storage.

The shed is made from galvanised steel with a protective weather coating and features a sloping roof, making it highly weather-resistant and designed to protect contents from rain. However, no shed is hermetically sealed, and proper assembly and site preparation (like ensuring a level base) are crucial to minimize moisture ingress and condensation.

The shed is constructed from durable galvanised steel, which is then finished with a protective weather coating for enhanced resistance against rust and outdoor elements.

First, verify that the shed is installed on a perfectly level surface. Check if all roof panels are correctly overlapped and securely fastened to prevent water ingress. Ensure all screws and seams are tightly sealed. Also, confirm that the four ventilation slots are clear of any obstructions like leaves or debris to allow proper airflow and reduce condensation.

Ensure the shed is level and plumb; an uneven base can cause the door frame to warp. Clean the door tracks thoroughly to remove any dirt, dust, or small pebbles. If cleaning doesn't resolve it, apply a light coat of silicone-based lubricant to the door tracks.

While galvanised steel is rust-resistant, prolonged exposure to moisture in damaged areas (e.g., deep scratches) can cause rust. Clean the affected area with a wire brush to remove loose rust. Apply a rust-inhibiting primer specifically for galvanised metal, then touch up with exterior-grade paint that matches the shed's color.

Ensure you have laid out all parts and identified them correctly according to the manual. Sometimes panels may require slight manipulation or pressure to align holes due to manufacturing tolerances. Having two people, as recommended, greatly assists with holding panels in place while fasteners are inserted. Double-check that all previous steps were completed correctly before moving on.