Best current price£61.01from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£61.01Visit shop Trend Pin Guided Round Over Cutter Pk 1 7E/1X1/4Tc
Visit shop4 offers from £61.01 - £72.95
View price history by clicking the chart icon.
The Trend Pin Guided Round Over Cutter (7E/1X1/4TC) is an essential tool for woodworkers looking to create professional, smooth ornamental edge profiles on softwoods, hardwoods, and man-made boards. Designed for both enthusiasts and professional furniture makers, it offers exceptional precision through its micro-granular tungsten carbide tips; however, users should note that the integrated guide pin requires steady control compared to traditional bearing-guided cutters.
| Model Part Number | 7E/1X1/4TC |
|---|---|
| Brand | Trend |
Yes, this cutter is designed for use on softwoods, hardwoods, and man-made boards like MDF and plywood.
A pin guide is smaller and allows for tighter internal curves and shapes where a standard ball-bearing assembly would be too large.
This bit has a 1/4 inch shank. You will need a 1/4 inch reduction collet or bushing if your router only accepts 1/2 inch bits.
Use a specialized router bit cleaner or a household degreaser and a soft brush to gently remove buildup.
This specific cutter produces a 4.8mm radius profile.
Increase your feed rate slightly and ensure the bit is clean of resin buildup.
Check that the shank is correctly seated to the K-Mark and ensure the router collet is tightened properly.
Ensure the guide pin is smooth and free of debris, and maintain constant pressure against the template.
To ensure peak performance, always insert the shank into the router collet up to the marked K-Mark to ensure secure clamping and reduced vibration. Before powering on your router, verify that the guide pin is clear of the workpiece surface to prevent burning. When working, maintain a steady feed rate to prevent heat buildup on the carbide tips. For care, keep the cutter free of resin and wood debris by using a specialized router bit cleaner. Store the bit in its original packaging or a protective block to prevent the sharp carbide edges from chipping against other tools.
