Draper TCT Router Bit - 1/4" Straight, 6.35 x 25mm

This router bit features Tungsten Carbide Tipped (TCT) cutting edges for enhanced durability and sharpness.

It is designed for creating straight cuts, dados, and rabbets in various routing applications.

The bit requires a 1/4" (6.35mm) collet, which is a standard size for most routers.

This bit is designed for professional use, offering the durability and precision required for demanding tasks.

It is best to store the router bit in its original display-packed hang-up box or a dedicated router bit case to protect the cutting edges.

Yes, the TCT construction makes it suitable for use on hardwoods, though appropriate feed rates and depth of cut should be observed.

The shank diameter is 1/4" (6.35mm), matching the cutting edge diameter for a straight profile.

Ensure the bit is fully seated in the collet and the collet is tightened securely. Check for any damage to the bit or collet. Reduce router speed if applicable.

Verify the bit is sharp. Clean any build-up on the cutting edges. Ensure the router's feed rate is appropriate for the material and cut depth. Check for excessive play in the router's bearings.

Confirm the bit is installed correctly and spinning in the right direction relative to the material feed. Check for dullness or damage to the cutting edges.