Bisan Teflon PTFE Tape - 10m x 12mm x 0.075mm

PTFE tape is used to create watertight seals on threaded joints, primarily in plumbing and heating systems.

Apply enough tape to create a good seal, but avoid overdoing it, as this can cause the joint to split.

No, this tape is designed for water and heating systems only. Use tape specifically designed for gas lines.

Store the tape in a dry place, away from direct sunlight and extreme temperatures.

PTFE tape has a long shelf life when stored properly; usually several years.

The Bisan tape is 10m long, 12mm wide, and 0.075mm thick.

No, PTFE tape is designed for single-use applications. It should be replaced each time a joint is disassembled and reassembled.

Unscrew the joint, remove the old tape, and reapply new tape, ensuring proper wrapping technique.

Use a fresh piece of tape and apply it more carefully, ensuring the threads are smooth and free of burrs.

Ensure the threads are clean and lubricated. Avoid over-tightening.