Best current price£11.81from The Range
Shopping.co.uk recommended and popular offers
The Range£11.81Visit shop Jcp Fixings Injection Resin Internally Threaded Sockets - M8 X 80 - Fjinjm08 - Grey
Visit shop4 offers from £11.81 - £13.68
View price history by clicking the chart icon.
The JCP Fixings Injection Resin Internally Threaded Sockets (M8 x 80) are designed for professional contractors and dedicated DIY enthusiasts who require a heavy-duty, reliable anchor point for masonry or concrete applications. These sockets provide a superior level of security by creating a high-strength bond when used with compatible injection resins, though they do require a precise drilling and cleaning process to ensure maximum load-bearing capacity.
| Model Part Number | Fjinjm08 |
|---|---|
| Brand | JCP Fixings |
Yes, but you will need to use a compatible plastic mesh sleeve along with the resin to prevent it from dispersing into the hollow voids.
No, this product is the socket itself; standard metric M8 bolts must be purchased separately.
The hole depth should match the 80mm length of the socket plus a small margin for the resin, ensuring the socket sits flush or slightly recessed.
Wipe away excess resin immediately with a suitable solvent recommended by the resin manufacturer before it begins to harden.
Yes, they are suitable for overhead use, provided the resin is compatible and the hole is properly cleaned to prevent the socket from sliding out.
This indicates the resin did not cure properly or the hole was too large; remove the socket, clean the hole again, and re-install with fresh resin.
Check that no excess resin has leaked into the internal threads during installation and clear any obstructions.
Installation follows a standard chemical anchoring procedure: 1. Drill a hole to the specified diameter and depth for the M8 socket. 2. Thoroughly clean the hole using a wire brush and air blower to remove all drilling dust. 3. Inject the resin into the hole, starting from the back to prevent air pockets. 4. Insert the internally threaded socket into the resin, ensuring it is flush with the surface. 5. Allow the resin to cure completely according to the manufacturer's time guidelines before tightening the bolt. These sockets are compatible with any M8 threaded machine bolt or stud. To care for the system, ensure that the internal threads are kept free of debris and that bolts are not over-tightened beyond recommended torque specifications.
