SolaDirect Pack Of 2 X 250 mm Backflap Hinge - Silver

The hinges are made of high-quality steel with a galvanised finish for enhanced durability and resistance to corrosion.

Yes, they are designed to withstand all weather conditions and ultraviolet radiation, making them perfect for both indoor and outdoor use.

The mounting hole diameter is 6 mm.

Screws are not included. You will need to select appropriate screws based on the material you are mounting the hinge to.

The hinges are designed to hold even heavy wings. However, for extremely heavy applications, it's recommended to use multiple hinges or reinforce the mounting points.

Clean with a damp cloth and avoid abrasive cleaners. Periodically inspect for wear and lubricate the pin if movement becomes stiff.

The thickness of the hinge material is 2 mm.

Apply a small amount of light oil or lubricant to the pin and pivot point. Work the hinge back and forth to distribute the lubricant.

Check that all mounting screws are fully tightened. Ensure the hinge is correctly aligned and that the frame or door is not warped.

While galvanised, prolonged exposure to highly corrosive environments may eventually show signs of surface rust. Clean with a soft brush and apply a rust inhibitor or clear coat suitable for metal if necessary.

This hinge has a 6 mm mounting hole diameter. You may need to drill new pilot holes if the existing ones do not match or are damaged. Ensure you are using the correct hinge size for your application.