Best current price£12.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£12.99Visit shop B&Q - 400 Ml Silver Peelable Film Semi-MattFlexible Protective Coating For Alloy Wheels & Tuning Parts
Visit shop1 offer from £12.99
View price history by clicking the chart icon.
The SolaDirect Peelable Spray Film is an ideal solution for automotive enthusiasts, DIY hobbyists, and homeowners looking for a reversible way to refresh and protect surfaces like alloy wheels, tuning parts, or decorative items. This fast-drying, semi-matt coating acts as a flexible shield against moisture, dirt, dust, and UV exposure; however, users should note that the ease of removal can vary significantly based on the substrate, the thickness of the applied coating, and the condition of the surface being sprayed.
| Colour | Silver |
|---|---|
| Model Part Number | 1415525 |
| Brand | SolaDirect |
| Container Volume | 400 ml |
While it works on many materials, it is primarily designed for metals and tuning parts. Always test on a small, inconspicuous area first.
Apply enough layers to create an opaque and elastic film. Thin coatings are much harder to remove later.
No, it is designed to be safe for most cured automotive paints, provided the paint is in good condition.
Yes, for the best drying and curing results, apply in a temperate, dry environment away from direct sunlight or extreme cold.
No, the SolaDirect Peelable Spray Film features a semi-matt finish.
Yes, once the film is fully cured, it is water-resistant. Use gentle washing techniques to maintain the life of the film.
This usually happens if the applied coating is too thin. Ensure you apply multiple, thick enough coats for a cohesive film structure.
Avoid spraying too close to the surface. Use steady, sweeping motions and maintain the recommended distance from the object.
Ensure the surface was completely degreased and dry before application. Residue on the surface prevents proper adhesion.
For optimal results, start with a surface that is thoroughly cleaned, dry, and completely free of grease or wax. Any remaining residue will compromise the adhesion and make eventual removal difficult. Apply the film in multiple thin layers rather than one heavy coat to ensure even curing. Always perform a patch test on an inconspicuous area of your substrate to verify compatibility. When you are ready to remove the film, start from a corner or edge; if the film is too thin, it may break, so ensure you have applied sufficient coats to create a cohesive, peelable layer.
