Upgrade your cleaning routine with the Roomba Plus 405 Combo Robot and AutoWash™ Dock. Delivering ...Upgrade your cleaning routine with the Roomba Plus 405 Combo Robot and AutoWash™ Dock. Delivering 70X stronger suction and advanced spinning DualClean™ Mop Pads, it vacuums, mops or tackles both in one seamless clean, leaving floors fresh and spotless.The powerful 4-Stage Cleaning System combines intense suction, a multi-surface rubber brush, edge-sweeping brush and DualClean™ spinning mop pads with SmartScrub for deeper scrubbing performance. Mop with water or a compatible cleaning solution, while automatic pad lift prevents carpets from getting wet.ClearView™ LiDAR navigation quickly maps your home, avoids obstacles and cleans methodically in neat rows, even in low light. Customise every clean with adjustable suction levels, targeted room cleaning, repeat passes for high-traffic areas and dedicated Clean Zones.The AutoWash™ Dock takes convenience to the next level. It automatically empties debris for up to 75 days, washes and dries mop pads, and keeps them refreshed between cleans, delivering consistent, hands-free performance.Control is simple via the Roomba Home App, voice assistant compatibility or onboard buttons. With its sleek, modern design, the robot and dock blend effortlessly into your home.
The iRobot Roomba Plus 405 Combo Robot is designed for busy homeowners seeking a comprehensive, automated cleaning solution that vacuums and mops. Its key benefit is the hands-free operation provided by the AutoWash™ Dock, which handles debris disposal, mop washing, and drying for extended periods. A potential caveat is the learning curve associated with customizing advanced features through the app.
All features
Colour
Black
Series
Roomba Plus 405 Combo
Brand
iRobot
Extended Product Information
FAQs
How often does the AutoWash™ Dock need attention?
The dock can empty debris for up to 75 days. You will need to empty the dirty water tank and refill the clean water reservoir periodically, typically after each mopping cycle or every few days depending on usage. The app will notify you when attention is needed.
Can I use my own cleaning solution?
It is recommended to only use iRobot-approved cleaning solutions. Using other products may damage the robot or the dock, and could void your warranty.
How does the robot avoid carpets when mopping?
The Roomba Plus 405 Combo features an Automatic Pad Lift technology. When it detects a carpet or rug, the mop pads are automatically lifted to prevent the carpet from getting wet.
What is the battery life of the robot?
The battery life varies based on cleaning mode and environment. The robot is designed to automatically recharge and resume cleaning if power runs low during a cleaning cycle.
Can I schedule cleanings for specific rooms?
Yes, using the Roomba Home App, you can create custom cleaning schedules for specific rooms or 'Clean Zones' within your home. You can also set preferences for suction power and number of passes for each area.
What maintenance is required for the mop pads?
The AutoWash™ Dock automatically washes and dries the DualClean™ Mop Pads between cleaning cycles, ensuring they are refreshed and ready for the next use. You will need to replace the mop pads periodically as they wear out.
Does the robot work in low light conditions?
Yes, the ClearView™ LiDAR navigation allows the robot to map and clean methodically even in low light conditions.
Troubleshooting
Robot not returning to the dock
Ensure the dock is properly powered and has a clear path. Check for obstructions around the dock and robot's charging contacts. Restart both the robot and the dock.
Mop pads not getting clean
Ensure the clean water reservoir is full and the dirty water tank is empty. Check the dock's internal mechanism for any blockages. Use the recommended cleaning solution.
Robot gets stuck frequently
Review the home map in the app for any incorrectly identified obstacles or zones. Clear the robot's path of small objects, cords, or high-pile rug fringes. Update the robot's firmware.
Poor suction power
Empty the dustbin. Clean or replace the filter. Check the robot's brushes and edge-sweeping brush for tangled debris and clean them.
App not connecting to the robot
Verify your Wi-Fi connection. Ensure the robot is powered on and within Wi-Fi range. Restart the Roomba Home App and the robot. Re-pair the robot if necessary.
Pros and Cons
Pros
Automated debris disposal and mop maintenance for extended hands-free cleaning.
Powerful suction and dual mopping system for effective vacuuming and mopping.
Intelligent navigation with obstacle avoidance and systematic cleaning patterns.
App-based customization allows for tailored cleaning schedules and zones.
Combines vacuuming and mopping in a single pass or independently.
Cons
Requires initial setup and app configuration for full customization.
The AutoWash™ Dock requires periodic refills of water and cleaning solution.
May not be ideal for homes with very thick carpets where the mop pad lift might be challenged.
Higher price point compared to basic robot vacuums.
Setup, Compatibility & Care
Setup:
Place the AutoWash™ Dock on a level surface with adequate Wi-Fi coverage.
Connect the dock to power.
Fill the clean water and dirty water reservoirs in the dock.
Install the robot's dustbin and mop pads.
Download the Roomba Home App and follow the on-screen instructions to connect the robot to your Wi-Fi network and create a home map.
Compatibility:
Wi-Fi: Requires a 2.4 GHz Wi-Fi network for app control and updates.
Voice Assistants: Compatible with popular voice assistants for hands-free commands (check app for specific integrations).
Flooring: Suitable for hardwood, tile, laminate, and carpets (with automatic pad lift on carpets).
Cleaning Solutions: Use only iRobot recommended cleaning solutions for optimal performance and to avoid damage.
Care:
AutoWash™ Dock: Empty the dirty water tank and refill the clean water tank as needed. Clean the dock's internal components periodically per the app's guidance.
Robot: Empty the dustbin when prompted by the app or dock. Clean the spinning mop pads after each use (handled by the dock). Wipe the robot's exterior and sensors with a dry or slightly damp cloth. Clean the filter and brushes regularly.