DJI Matrice 400 Dual Gimbal Connector - CP.EN.00000671.01
Best current price£210.00from DJI UK
Best offers
Shopping.co.uk recommended and popular offers
DJI UK£210.00Visit shop Dji Matrice 400 Dual Gimbal Connector
Visit shopDJI UK£210.00Visit shop One Offer
1 offer from £210.00
View price history by clicking the chart icon.
Product Information
Full details
The DJI Matrice 400 Dual Gimbal Connector (CP.EN.00000671.01) is designed for professional industrial drone operators who require simultaneous multi-sensor data collection during a single flight. Its primary benefit is the ability to mount dual payloads securely beneath the nose of the aircraft, significantly increasing operational efficiency for mapping, surveillance, and inspection missions. Note that this accessory requires specific configuration via the E-Port V2 interface and may impact overall flight time due to increased payload weight.
All features
| Model Part Number | CP.EN.00000671.01 |
|---|---|
| Brand | DJI |
Extended Product Information
FAQs
Is this connector compatible with drones other than the Matrice 400?
No, this specific connector is engineered exclusively for the DJI Matrice 400 airframe.
Does using two gimbals significantly affect flight time?
Yes, the increased power consumption and total weight will generally lead to a decrease in maximum flight time compared to a single payload setup.
What is the E-Port V2 used for?
The E-Port V2 provides the necessary data and power communication channels for the dual gimbals to function with the aircraft's internal systems.
Can I use any two payloads with this mount?
You must ensure that the chosen payloads are supported by the Matrice 400 platform and that their combined weight is within the manufacturer's specified payload limits.
How do I maintain the connector ports?
Keep the ports free of dust and debris by using a soft brush or low-pressure compressed air; avoid using liquids or abrasive materials.
Troubleshooting
One or both gimbals are not being detected by the remote controller
Power down the aircraft, check the connection at the E1 and E2 ports, and ensure all pins are clean and fully seated.
Aircraft appears unstable during flight with dual payloads
Verify that the combined payload weight is within the aircraft's limits and re-calibrate the IMU and compass if necessary.
Gimbal feed is flickering or disconnecting
Check the communication cables for physical damage or sharp bends that may interrupt signal transmission.
Pros and Cons
Pros
- Doubles sensor capacity in a single flight
- Optimized mounting location for better aircraft balance
- Uses high-speed proprietary E-Port connectivity
- Easy installation process for field operations
Cons
- Increased payload weight may reduce total flight time
- Requires careful balance calibration for heavy payloads
- Specific to the Matrice 400 airframe
- May require firmware updates for full dual-sensor synchronization
Setup, Compatibility & Care
To install, ensure the aircraft is powered off, then align the connector with the nose mounting point and secure it according to the official hardware specs. Connect your payloads to the E1 and E2 ports provided on the E-Port V2. Always verify that the locking mechanism is fully engaged before takeoff. For maintenance, keep the E-Port pins clean and free of debris using compressed air. Avoid exposure to extreme moisture or corrosive environments to prevent terminal oxidation. Regularly check the mounting screws for signs of vibration-induced loosening.