Growers Choice by Tildenet Greenhouse Heater - 2kW - IP24

The fan-only setting consumes 25W.

The heater has an IP24 rating, which means it is protected against splashing water, making it suitable for humid greenhouse environments. However, it is designed for indoor use only and should not be submerged or exposed to direct jets of water.

The heater is most effective in small to medium-sized greenhouses or outbuildings. Its heating capacity depends on factors like the size of the space, insulation levels, and the desired temperature differential.

No, this model does not have a built-in timer function. Temperature control is managed via the integrated thermostat.

The dimensions are Height 34cm x Width 21cm x Depth 28.5cm.

Yes, the fan can be operated on its 25W setting without engaging the 2kW heating element, allowing for air circulation even when heating is not required.

No, the heater comes fully assembled and ready for use. Simply position it and plug it in.

Check that the power cord is securely plugged into a working outlet. Ensure the thermostat is set to a desired temperature above the current ambient temperature.

The overheat protection may have engaged. Ensure vents are clear of obstructions and the unit is not placed too close to walls or other objects. Allow the unit to cool down before resetting.

Verify the unit is switched to the 25W fan setting and the thermostat is set appropriately. Check power connection.

Ensure the heater is set to the 2kW setting. Check if the thermostat setting is higher than the room temperature. The heater's effectiveness can be reduced in very large or poorly insulated spaces.