PIR Motion Sensor Switch - FTVOGUE
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This FTVOGUE PIR Motion Sensor Switch is designed for automated lighting control, ideal for enhancing security and convenience in outdoor and indoor spaces. It detects human movement and automatically activates connected lights, offering adjustable time settings and day/night operation modes. While excellent for safety lighting, users should ensure proper placement for optimal detection range.
All features
| Model Part Number | FTVOGUEd17prb5qwg |
|---|---|
| Brand | FTVOGUE |
Extended Product Information
FAQs
What is the detection range of the motion sensor?
The detection range varies based on installation height and environmental conditions, but it is designed to cover common approach areas effectively.
Can I use this with LED lights?
Yes, the switch is generally compatible with LED lights, provided the total wattage does not exceed the switch's maximum load rating.
How do I adjust the time the light stays on?
Refer to the product's specific manual for the location and method of adjusting the time duration, typically a dial or switch on the unit.
Is this suitable for outdoor use?
Yes, this motion sensor switch is designed for both indoor and outdoor applications, offering enhanced safety and convenience.
Does the sensor require batteries?
No, this is a hardwired electrical device and requires connection to a mains power supply.
How do I reset the sensor if it's malfunctioning?
You can typically reset the sensor by turning off the power supply to the unit at the circuit breaker for a minute and then turning it back on.
Troubleshooting
Light does not turn on when motion is detected.
Check the power supply to the sensor and the light fixture. Ensure the light bulb is functional. Verify that the sensor is set to an active mode (e.g., not in 'off' or 'daylight only' mode if motion occurs during the day).
Light stays on continuously.
Check the 'time on' adjustment setting; it may be set to maximum. Ensure there are no constant sources of motion within the detection range. Reset the device by briefly cutting power.
Sensor is too sensitive or not sensitive enough.
Adjust the sensitivity setting if available, or reposition the sensor to a location with a clearer line of sight and fewer potential false triggers (e.g., away from heat sources or swaying vegetation).
Unit does not respond in daylight.
Ensure the 'day/night' setting is configured correctly. If intended for 24-hour operation, confirm the setting allows for daylight activation.
Pros and Cons
Pros
- Automates lighting for convenience and security.
- Adjustable settings offer customization for different needs.
- Deters crime by ensuring illuminated areas.
- Energy-efficient by only activating lights when needed.
- Versatile for both indoor and outdoor use.
Cons
- Requires professional installation for safety and optimal function.
- Detection range can be affected by environmental factors.
- May trigger falsely with large moving objects if not positioned correctly.
- Initial setup may require some understanding of wiring.
Setup, Compatibility & Care
Setup: This device requires electrical wiring and should be installed by a qualified electrician to ensure safety and proper function. Connections typically involve wiring the sensor to the power source and the light fixture.
Compatibility: The switch is designed to control standard lighting circuits. Ensure the total load of the connected light does not exceed the switch's maximum rated capacity.
Care: Keep the sensor lens clean using a soft, dry cloth. Avoid using abrasive cleaners or solvents. Ensure the unit is protected from direct water spray if installed outdoors, though its design is intended for such applications.