Baby Stig Racer On Board Car Window Vinyl Decal Sticker - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for car owners looking to add a touch of personality and humor to their vehicle. The key benefit is a durable, easy-to-apply vinyl decal that makes a statement. A potential caveat is ensuring proper application for longevity. This "Baby Stig Racer On Board" decal from SoCoolDesign is designed for car windows, featuring a recognizable "Baby Stig" character. Its primary features include durable vinyl construction, simple application and removal, and a 5-inch height for visibility.
All features
| Model Part Number | SCD-100053-WHITE |
|---|---|
| Brand | SoCoolDesign |
Extended Product Information
FAQs
How long does the decal typically last?
When applied correctly and cared for, this durable vinyl decal can last for several years, though prolonged exposure to intense sunlight may cause some fading over time.
Can I apply this to painted surfaces?
This decal is specifically designed for glass car windows. Application on painted surfaces is not recommended and may damage the paint upon removal.
Is the decal waterproof?
Yes, the vinyl material is waterproof and designed to withstand rain and car washes.
What does 'Baby Stig' refer to?
"Baby Stig" is a humorous reference to 'The Stig', a character from the popular car show Top Gear, often depicted as a child or baby for comedic effect.
Will this decal damage my car window?
When applied and removed according to instructions, the decal should not damage your car window. However, it's always recommended to test a small, inconspicuous area if you have concerns about window tinting or coatings.
What is the MPN for this product?
The manufacturer part number (MPN) for this product is SCD-100053-WHITE.
What are the dimensions of the decal?
The decal is 5 inches tall.
Troubleshooting
Decal not sticking properly
Ensure the window surface is clean, dry, and free of wax or dust before application. Reapply pressure with a squeegee or credit card.
Bubbles appearing under the decal
Try to carefully lift the edge of the decal where the bubble is and smooth it down again, pressing firmly. For stubborn bubbles, a small pinprick to release air might be considered, but proceed with caution.
Decal is difficult to remove
Gently warm the decal with a hairdryer on a low setting, then carefully peel it away. Clean any remaining residue with a glass cleaner or adhesive remover.
Fading or peeling after some time
This may be due to prolonged exposure to harsh elements or UV rays. Ensure proper initial application. For significant fading, replacement might be necessary.
Pros and Cons
Pros
- Adds a unique and humorous touch to any vehicle.
- Made from durable materials for long-lasting use.
- Simple to apply and remove, making it hassle-free.
- Visibly sized at 5 inches for clear display.
- Suitable for all car windows.
Cons
- Requires careful application to avoid bubbles or peeling.
- May fade over extended periods of direct sunlight exposure.
- Removal might leave faint residue on older or less well-maintained windows.
- Strictly decorative; does not offer any functional benefit.
Setup, Compatibility & Care
Setup:
- Clean the car window thoroughly with glass cleaner and a lint-free cloth to remove dirt and grime. Ensure the surface is completely dry.
- Carefully peel the backing paper away from the vinyl decal, avoiding touching the adhesive side.
- Position the decal on the desired window location. For precise placement, start from one edge and smooth it down.
- Once positioned, use a credit card or squeegee to firmly press the decal onto the glass, working from the center outwards to eliminate air bubbles.
- Slowly peel off the clear transfer tape at a sharp angle. If any part of the decal lifts, lay the tape back down and press again.
Compatibility:
This decal is compatible with all standard car window glass surfaces. It is designed for exterior application. Ensure you comply with local regulations regarding window obstructions.
Care:
- Clean around the decal with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners directly on the sticker.
- To wash your car, use standard car washing methods. Do not use high-pressure washers directly on the decal.
- If the decal begins to lift after a prolonged period, gently press it back down. For removal, use a plastic scraper or your fingernail.