Plumbright Endfeed Backplate Elbow 15mm x 1/2"
Best current price£7.78from City Plumbing GB
Best offers
Shopping.co.uk recommended and popular offers
City Plumbing GB£7.78Visit shop Plumbright Endfeed Backplate Elbow 15Mm X 1/2" 953107
Visit shopCity Plumbing GB£7.78Visit shop All Offers
3 offers from £7.78 - £87.00
View price history by clicking the chart icon.
City Plumbing GBPlumbright Endfeed Backplate Elbow 15Mm X 1/2" 953107
Free delivery in 1–3 days
£7.78
Visit shop
eBay10 x 15mm solder end feed x 1/2"" female brass wall plate elbow backplate
£4.99 delivery
£19.99
Visit shop
Product Information
Full details
This guide is for plumbers and DIY enthusiasts using the Plumbright Endfeed Backplate Elbow 15mm x 1/2" for creating a robust and leak-free plumbing system. The primary benefit is its ease of use and compatibility with domestic gas installations, offering smooth lines for minimal flow restriction. However, users should be aware of the importance of proper installation to ensure a secure and long-lasting connection.
All features
| Model Part Number | P803Wpef2 |
|---|---|
| Brand | Travis Perkins |
Extended Product Information
FAQs
What size pipe does this elbow fit?
The Plumbright Endfeed Backplate Elbow is designed for use with 15mm copper pipe and 1/2" connections.
Is this elbow suitable for gas installations?
Yes, this elbow is suitable for domestic gas installations.
What is the guarantee on this product?
This product comes with a 25-year guarantee.
How do I install this elbow?
Prepare the pipe, apply flux, insert the pipe into the fitting, heat with a blowtorch, and allow to cool. Always test for leaks.
What material is this elbow made from?
It is manufactured from grade A copper.
Is the product recyclable?
Yes, the product is 100% recyclable.
What should I do if the joint leaks?
Reheat and add solder to ensure a complete seal. Check for proper insertion depth and flux application.
Troubleshooting
Joint leaks after installation.
Check the solder joint for complete sealing. Reheat and add solder if necessary. Ensure proper flux application and pipe insertion depth.
Slow water flow.
Ensure that there are no kinks in the pipe and that the elbow is properly installed without any obstructions. Check for debris in the system.
Corrosion observed on the fitting.
Check for galvanic corrosion by ensuring that incompatible metals are not in contact. Replace the fitting if corrosion is severe and affecting the structural integrity.
Pros and Cons
Pros
- Easy to install due to the end feed design.
- Suitable for a wide range of applications, including domestic gas.
- The smooth lines promote efficient water flow.
- Long lifespan due to the 25-year guarantee and grade A copper construction.
- Environmentally friendly due to being 100% recyclable.
- Cost-effective solution.
Cons
- Requires proper installation techniques for optimal performance and leak prevention.
- May require specific tools and expertise, particularly for gas installations.
- Compatibility is limited to 15mm pipe size and 1/2" connection.
- Potential for corrosion if not installed properly or with incompatible materials.
Setup, Compatibility & Care
- Preparation: Ensure the pipe ends are clean and free of debris. Use a pipe cutter to make a clean, square cut on the copper pipe.
- Compatibility: This elbow is designed for use with 15mm copper pipe and 1/2" connections. It is suitable for domestic gas installations.
- Installation: Apply flux to the pipe and the fitting. Insert the pipe fully into the elbow. Heat the fitting and pipe with a blowtorch until the solder flows evenly into the joint. Allow the joint to cool completely.
- Testing: Once the joint is cool, check for leaks. For gas installations, always perform a pressure test as per local regulations.
- Care: Ensure that the plumbing system is protected from freezing. Regularly inspect the joints for any signs of corrosion or leaks. Avoid using corrosive cleaning agents near the fittings.