Parnells 18X9.50-8 ATV Knobby Tyre Set of 4

Each wheel has a maximum load capacity of 102 kg (225 lbs).

The recommended tyre inflation pressure is 5 psi.

No, these wheels are intended for off-road applications only and are not suitable for highway service.

PCD stands for Pitch Circle Diameter, which is the diameter of the circle on which the wheel stud holes are centered. A 100mm PCD means the distance across the center of the hub, passing through the center of opposite stud holes, is 100mm.

These tyres are specifically designed for 18x9.50-8 tyre size and are pre-fitted to 4x100mm PCD steel rims. Using them on different rim sizes is not recommended and may compromise safety and performance.

Clean the rims with a damp cloth. The powder coat and E-coating provide anti-corrosion properties, so avoid abrasive cleaners that could damage the finish.

The stud hole size is 13.5mm, which typically suits M12 studs. Ensure you use lug nuts compatible with your vehicle's studs and the wheel's hole size.

Check that the wheel is securely fastened to the hub and that lug nuts are properly tightened. Ensure the tyre is correctly seated on the rim and inflated to 5 psi. Consider having the wheel balanced if the issue persists.

Inspect the tyre for punctures, cuts, or damage to the sidewall. Check the valve stem for leaks. Ensure the bead of the tyre is properly seated against the rim. If leaks are found, professional repair or replacement may be necessary.

Ensure tyres are inflated to the recommended 5 psi. For very soft or muddy conditions, consider if the knobby tread is optimized for that specific terrain. Clean mud and debris from the tread pattern to restore grip.

Clean the affected area gently with a damp cloth. For minor surface corrosion, a mild polish may help. Ensure the E-coating is not significantly damaged. Avoid abrasive cleaners that can damage the protective coating.