Best current price£4.49from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£4.49Visit shop Qty 3 Idc Strip 237B Grey 10 Pair Bt Cable Terminal Connection Block Coupler 5055538145957
Visit shop
B&Q£6.09Visit shop - Qty 3 Idc Strip 237B Grey 10 Pair Bt Cable Terminal Connection Block Coupler
Visit shop3 offers from £4.49 - £6.09
View price history by clicking the chart icon.
This guide is for network technicians and installers working with structured cabling systems. The Loops IDC Strip 237B provides a reliable and efficient method for connecting 10 pairs of wires, simplifying complex installations. A potential caveat is the specific compatibility with 105mm width mount frames, requiring verification before purchase. This product is designed for easy push-on termination onto mount frames, featuring individual IDC ports for clean and secure connections.
| Model Part Number | 237B |
|---|---|
| Brand | Loops |
IDC stands for Insulation Displacement Connector. It's a type of electrical connection that pierces the insulation of a wire to make contact, eliminating the need for stripping the wire first.
Yes, the Loops IDC Strip 237B supports stranded wires within the range of 7/0.15 to 7/0.25 (19-26 AWG).
Each strip has 10 pairs, meaning it can terminate 20 individual wires (20 incoming and 20 outgoing).
Test points allow for electrical testing (e.g., continuity checks) of individual connections without disrupting the main termination. This is useful for troubleshooting and verification.
No, these IDC strips are designed for indoor, dry environments. They are not rated for exposure to moisture, extreme temperatures, or outdoor conditions.
A standard IDC termination tool is required to properly seat the wires into the insulation displacement contacts.
Please refer to the product packaging or Loops' official documentation for specific warranty information, as it may vary.
Verify the wire has been fully seated in the IDC port using a termination tool. Check for any damage to the wire or the IDC contact. Use the test point to check for continuity.
Ensure the correct wire gauge is used for the IDC termination. Re-terminate the connection, applying firm and even pressure with the tool. Check for any corrosion or debris on the contacts.
Confirm the mount frame is precisely 105mm in width. Ensure there are no obstructions on the frame or the strip's mounting clips. Apply steady pressure during installation.
Setup: The Loops IDC Strip 237B is designed for easy installation. Align the strip with a 105mm width mount frame. Push the strip firmly onto the frame; the connections will snap into place. Use a suitable IDC termination tool to press down the wires into the IDC ports, ensuring a secure connection. For each wire, insert it into the designated port and apply firm, consistent pressure with the tool to seat the conductor and displace the insulation.
Compatibility: This IDC strip is specifically designed for mount frames with a 105mm width. It is compatible with solid core wires ranging from 0.4mm to 0.9mm in diameter and stranded wires from 7/0.15 to 7/0.25 (19-26 AWG).
Care: These strips are intended for indoor, dry environments. To maintain performance, keep the terminations clean and free from dust and moisture. Avoid exposing the strips to excessive heat or direct sunlight. Cleaning can be done with a dry, lint-free cloth. Do not use liquid cleaners directly on the contacts.
