Best current price£13.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£13.99Visit shop B&Q - Steri-Grout Mould Resistant Flexible Floor & Wall Tile GroutWhite3Kg
Visit shop3 offers from £13.99 - £14.95
View price history by clicking the chart icon.
This Bond It STERI-GROUT is designed for homeowners and DIY enthusiasts looking for a durable, mold-resistant grout for interior wall and floor tiles, especially in wet areas like kitchens and bathrooms. Its key benefit is inhibiting mold growth and reducing dirt pickup, maintaining a cleaner finish for longer. A potential caveat is its suitability for joints between 2mm and 20mm, meaning it may not be ideal for very narrow or exceptionally wide grout lines.
| Colour | White |
|---|---|
| Brand | Bond it |
The Bond It STERI-GROUT is suitable for grouting joints from 2mm up to 20mm wide.
No, this product is specifically recommended for internal sanitary installations like kitchens, bathrooms, and toilets. It is not designed for exterior applications.
Refer to the manufacturer's instructions on the product packaging for the precise water-to-powder ratio, as this can vary slightly.
Yes, it is a flexible grout suitable for use in areas of limited movement/vibration, making it ideal for use over heated sub-floors.
Once the grout has begun to firm up, remove excess with a damp sponge, rinsing the sponge frequently. After final setting, clean with a damp cloth or mild detergent and water. Avoid abrasive cleaners.
It has excellent adhesion characteristics for porcelain and fully vitrified tiles.
The grout contains a strong fungicide that actively inhibits the growth of black spot mould.
This may be due to insufficient water during mixing or improper cleaning after application. Ensure the correct water ratio is used and that excess grout was thoroughly removed before it dried hard.
This could happen if the grout was mixed too dry, the joints were not fully packed, or if the substrate has excessive movement. Ensure correct mixing, full joint filling, and consider the suitability of the substrate.
The grout may have dried too much before cleaning. Try dampening the haze with a clean, damp cloth and gently rubbing. For stubborn haze, a specialized grout haze remover might be necessary, used according to its instructions.
Ensure adequate ventilation in the area. While the grout inhibits mould, excessive moisture and lack of airflow can still lead to growth. Check for any persistent water leaks or condensation issues.
Setup: Ensure tiles are firmly set and adhesive is fully cured before grouting. Mix the grout powder with clean water according to the manufacturer's instructions, aiming for a smooth, lump-free paste. Apply the grout using a grout float, pressing it firmly into the joints. Remove excess grout with the float held at an angle. Clean off remaining residue with a damp sponge or cloth once the grout has begun to firm up, rinsing the sponge frequently.
Compatibility: This grout is recommended for use with porcelain and fully vitrified tiles. It is suitable for grouting joints from 2mm to 20mm. It can be used over timber plyboards and heated sub-floors due to its flexibility.
Care: Clean with a damp cloth or sponge. Avoid using harsh abrasive cleaners or acidic-based cleaning agents, as these can damage the grout over time. For stubborn marks, use a mild detergent and water.
