Shopping.co.uk

Kenable Cat6A UTP IDC Punch Down Type In-Line Coupler Joint - 011811

Kenable Cat6A UTP IDC Punch Down Type In-Line Coupler Joint - 011811

UTP Junction Box suitable for joining bare ended (UTP) Cat6a Cables together. Product Type: IDC Co...

Best current price£4.40from OnBuy.com

Best offers

Shopping.co.uk recommended and popular offers

All Offers

3 offers from £4.40 - £6.29

View price history by clicking the chart icon.

OnBuy.comCat6a Utp Idc Punch Down Type In-Line Coupler Joint 5054338118116
Free delivery in 1–3 days
£4.40
Visit shop
B&QB&Q - Cat6A Utp Idc Punch Down Type In-Line Coupler Joint
Free delivery in 1–3 days
£6.29
Visit shop

Product Information

Full details

This Kenable Cat6A UTP IDC Junction Box is designed for network professionals and DIY installers who need to extend or repair existing Cat6a UTP Ethernet cables without the complexity of traditional connectors. Its primary benefit is offering a simple, cost-effective solution for cable joins, saving the need to run entirely new cables. A potential caveat is its suitability for UTP connections only; shielded cables would require a different solution. Key features include IDC punch-down termination, support for Cat6a standards, and versatile mounting options.

All features

Model Part Number011811
Brandkenable

Extended Product Information

FAQs

What type of cables can be joined with this junction box?

This junction box is specifically designed for joining bare-ended UTP (Unshielded Twisted Pair) Cat6a Ethernet cables.

Do I need special tools to install this?

Yes, you will need a standard 110 or Krone style punch down tool to terminate the wires into the IDC connectors.

Can I use this for shielded (STP/FTP) Cat6a cables?

No, this junction box is designed for UTP cables only. Using it with shielded cables will compromise the shielding and network performance.

How can I mount this junction box?

The junction box can be mounted using screws through the pre-drilled holes or by using the supplied adhesive pad for a tool-free mounting option on smooth surfaces.

What is the maximum data speed this coupler supports?

When properly installed with Cat6a UTP cable, it supports the standards for Cat6a, which include 10 Gigabit Ethernet (10GbE) performance.

Is this a replacement for an RJ45 connector?

Yes, it serves as an in-line coupler to join two bare-ended cables, effectively extending a network run without the need for separate RJ45 connectors and crimping at the join point.

Troubleshooting

No network connectivity after joining cables.

Verify that all wires are correctly punched down into the IDC slots, ensuring the correct color order is maintained for both cables. Double-check that the correct type of cable (Cat6a UTP) is being used. Test each individual cable run without the junction box if possible.

Slow network speeds or intermittent connection.

Ensure the punch-down termination is firm and that no individual wires are frayed or improperly seated. Confirm that the junction box is only used for UTP cables and not shielded variants. Check for physical damage to the cables near the junction.

Difficulty seating wires into IDC slots.

Ensure you are using a compatible 110 or Krone punch down tool. Make sure the wires are stripped to the correct length (if applicable, though IDC is designed to work with insulation intact) and are aligned properly before punching down.

Pros and Cons

Pros

  • Simple and quick to install using standard punch-down tools.
  • Cost-effective solution for extending or repairing Cat6a UTP cables.
  • Provides a clean, in-line connection without bulky external couplers.
  • Versatile mounting options (screws or adhesive pad).
  • Supports Cat6a performance standards for high-speed networking.

Cons

  • Only suitable for UTP (Unshielded Twisted Pair) cables.
  • Requires a punch-down tool for termination.
  • Adds a slight physical point of connection which could be a point of failure if not terminated correctly.
  • Not designed for shielded (STP/FTP) Cat6a cables.

Setup, Compatibility & Care

Setup:

  1. Prepare Cables: Ensure both Cat6a UTP cables are cut cleanly and are of the bare-ended (UTP) type.
  2. Position Wires: Open the junction box and carefully position the individual wires from each cable into the corresponding IDC slots. Ensure the correct color code order is maintained for both cables.
  3. Punch Down: Using a 110 or Krone style punch down tool, firmly press each wire into its respective IDC slot. The tool will cut off any excess wire.
  4. Close Box: Securely close the junction box lid.
  5. Mount (Optional): If desired, use screws through the designated holes or the adhesive pad to mount the junction box to a flat surface.

Compatibility:

  • Cable Standard: Cat6a UTP (Unshielded Twisted Pair) Ethernet cables.
  • Termination Tools: 110 and Krone style punch down tools.
  • Mounting Surfaces: Walls, conduits, or any flat, stable surface.

Care:

  • Keep the junction box clean and free from dust and debris. A dry or slightly damp cloth can be used for cleaning.
  • Ensure connections remain secure and do not become loose over time. Periodic visual inspection may be beneficial in critical installations.

Price History

DatePrice
Visit shop