Awenta Extractor Fan - 100mm Timer White ABS

The TRAX front panel is a design feature that enhances the fan's aesthetic appeal, offering a modern look that integrates better into room decor.

The timer function typically allows for an adjustable run-on period after the fan is switched off. Specific adjustment ranges are detailed in the product's installation manual.

While designed for bathrooms, it can be used in kitchens if the ventilation needs and installation requirements (e.g., ducting, proximity to cooking areas) are met. However, it is primarily optimized for bathroom humidity removal.

The IPX4 rating means the fan is protected against splashing water from any direction, making it suitable for installation in areas like bathrooms where moisture is present.

Typically, extractor fans are hard-wired directly into the mains supply and do not come with a pre-attached power cord. Installation should be performed by a qualified electrician.

It is recommended to clean the exterior and check for blockages at least every 6 months, or more frequently if you notice reduced airflow or dust accumulation.

Warranty information is usually provided by the retailer or manufacturer. Please refer to your purchase documentation for specific warranty terms.

Check the power supply connection and ensure the circuit breaker is not tripped. Verify wiring is correct according to the installation manual.

Ensure the fan is securely mounted. Check for any obstructions in the fan blades or the connected ductwork. If the noise persists, the internal motor may require inspection.

Verify the timer settings and ensure the wiring for the timer circuit is correctly connected. Refer to the installation manual for specific timer adjustment procedures.

Clean the fan blades and the interior of the ducting. Ensure the front panel is not blocked and is clean. Check for any kinks or blockages in the ventilation duct.