Best current price£4.52from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£4.52Visit shop Floplast White Ogee Gutter Internal Stopend Left Hand - 110Mm X 80Mm
Visit shop4 offers from £4.52 - £6.60
View price history by clicking the chart icon.
This guide is for homeowners and professional installers seeking a reliable solution for capping off gutter systems. The FloPlast Ogee Gutter Internal Stopend Left Hand provides a secure and watertight seal at the end of your gutter run, ensuring efficient water management. A key consideration is its specific left-hand orientation, which must be matched to the gutter run direction.
| Brand | FloPlast |
|---|
An internal stopend is a component used to cap off the end of a gutter run. It is inserted *inside* a gutter fitting, such as a running outlet, to create a watertight seal.
The designation (left or right hand) refers to the orientation of the stopend relative to the flow of water in the gutter and the direction it faces when installed. For an Ogee system, the stopend is handed. You need to select the correct hand to match the specific end of your gutter run. Generally, if the water flows from right to left, you need a left-hand stopend.
This stopend is specifically designed for the FloPlast Ogee gutter system and is compatible with BS EN 12200 / BS EN 607 standards. Compatibility with other brands is not guaranteed.
The dimensions are 110mm for the gutter width and 80mm for the fitting depth, suitable for the specified Ogee system.
Insert the back edge of the stopend into the fitting first, then gently pull the front edge down until it clips into place, compressing it onto the fitting's rubber seal.
The stopend is made from durable uPVC, designed for longevity and resistance to weather conditions.
Generally, no special tools are required beyond those typically used for gutter installation, such as a tape measure and potentially a rubber mallet for gentle adjustments if needed.
Ensure you are using the correct left-hand stopend for the specific fitting and gutter profile. Check for any obstructions or debris within the fitting or on the stopend. Verify the gutter fitting is correctly seated.
Confirm the stopend is fully seated and compressed onto the rubber seal. Inspect the rubber seal for damage or wear and replace if necessary. Ensure no debris is trapped between the stopend and the seal.
Re-insert the stopend, ensuring the back edge is properly seated first, then gently pull the front edge down until it clips securely. Check that the fitting's clip is engaging correctly.
Setup:
Compatibility:
Care:
