Best current price£144.00from Wex Photo Video
Shopping.co.uk recommended and popular offers
Wex Photo Video£144.00Visit shop Broncolor RFS 2.2 C Transmitter - Canon - Studio Flash Trigger
Visit shop1 offer from £144.00
View price history by clicking the chart icon.
The Broncolor RFS 2.2 C Transmitter is designed for Canon camera users needing precise remote control and radio flash triggering for Broncolor power packs and monolights. Its key benefit is the integration of Broncolor HS technology, enabling extremely fast shutter speeds up to 1/8000s with compatible lighting kits like Siros L and Move. A minor caveat is its specific compatibility with Canon cameras and Broncolor RFS 2-equipped units. This guide will cover its features, setup, and usage.
| Brand | Broncolor |
|---|
The RFS 2.2 C transmitter is designed for Canon EOS digital cameras featuring a standard hot shoe.
You can use any Broncolor power pack or monolight that is equipped with an RFS 2 interface. For High Shutter Speed (HS) functionality, compatible kits like the Siros L and Move are required.
Broncolor HS technology allows you to synchronize your flashes at very high shutter speeds, up to 1/8000s, when using compatible Broncolor lighting. This is useful for freezing motion or shooting with wide apertures in bright light.
Yes, the RFS 2.2 C transmitter allows you to remotely control the settings of your Broncolor power packs or monolights that have an RFS 2 interface.
No, the Broncolor RFS 2.2 C transmitter does not support TTL (Through-The-Lens) metering. It operates as a manual radio trigger and remote control.
The AF assist light is activated when the transmitter is mounted on the camera and the camera's autofocus system requires it in low-light conditions. Ensure the AF assist light function is enabled in your camera's settings.
The operational range can vary depending on environmental conditions and potential interference, but it is designed for reliable studio and location use within typical working distances.
Ensure the transmitter and Broncolor unit are powered on. Verify the Broncolor unit has an RFS 2 interface and is in range. Check battery levels on the transmitter. Confirm the unit is set to receive signals and not in a sleep mode.
Confirm that both the transmitter and the Broncolor lighting unit (e.g., Siros L, Move) are explicitly set to HS mode. Ensure the camera's shutter speed is set to a value within the HS operational range (up to 1/8000s).
Check if the AF Assist light function is enabled in the camera's settings. Ensure the transmitter is correctly seated in the camera's hot shoe.
Minimize potential interference from other wireless devices. Ensure no large metal objects are between the transmitter and the receiver unit. Try changing the radio channel if applicable and supported by the Broncolor system.
Setup:
Compatibility:
Care:
