Bremmer Prime Blade Hand Dryer - Silver

The HEPA filter captures and removes 99.9% of bacteria and particles from the air, ensuring that your hands are dried with clean, purified air, significantly enhancing hygiene.

To use the dryer, place your hands slowly into the designated area for 5 seconds, then remove them. Re-insert your hands for another 5 seconds to complete the drying process. Total drying time is approximately 10 seconds.

The frequency of HEPA filter replacement depends on usage and environmental conditions. It is recommended to check the filter periodically and consult the product manual for specific replacement guidelines.

While specific energy consumption figures are not provided, hand dryers generally consume less energy over their lifespan compared to the continuous production and disposal of paper towels.

Please refer to the product manual or contact the retailer for specific warranty information as it can vary.

Yes, its wall-mounted design makes it suitable for various washroom sizes. Ensure there is adequate clearance for operation and maintenance.

Regular cleaning of the exterior with a damp cloth and periodic checking and replacement of the HEPA filter are the main maintenance requirements. Ensure vents are kept clear.

Check that the unit is properly connected to a power source and that the circuit breaker has not tripped. Ensure the power switch on the unit is in the 'on' position.

Verify that the HEPA filter is clean and properly installed. Check for any obstructions in the air intake or outlet vents. Ensure the unit is receiving adequate power.

Confirm that the HEPA filter is not clogged and is correctly seated. Ensure hands are placed correctly within the drying zone for the full duration of each 5-second cycle.

Check for any loose parts or obstructions within the unit. If the noise persists, contact customer support.