Best current price£135.70from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£135.70Visit shop Sam Mouldings Anthracite/Grey Double Tongue Andamp; Groove Mdf Cladding - 194Mm X 4.88Mtr
Visit shop2 offers from £135.70
View price history by clicking the chart icon.
The SAM Mouldings Double Tongue and Groove MDF Cladding in Anthracite Grey is designed for homeowners and contractors seeking a modern, durable wall covering solution that provides an immediate, professional finish without the need for additional painting. This cladding is ideal for contemporary interior wall paneling projects, offering a clean, linear aesthetic; however, it is strictly intended for internal use and should be kept away from high-moisture environments like bathrooms or direct water contact.
| Model Part Number | SAM004-064185 |
|---|---|
| Brand | SAM Mouldings |
No, this is an MDF product and is not suitable for bathrooms or any areas with high levels of moisture or direct contact with water.
No, the boards are fully finished in Anthracite Grey and are ready for installation immediately.
Yes, while typically installed vertically to create height, the tongue and groove system works perfectly well for horizontal installation if the sub-frame is prepared accordingly.
The cladding has a thickness of 12mm.
You can use a combination of construction adhesive and pins/nails driven through the tongue of the board for a hidden fix.
Use a sharp, high-tooth-count fine saw blade and apply painter's tape over the cut line before sawing.
Check the groove for dust or debris; ensure the board is held at the correct angle during insertion, and verify the wall or batten structure is perfectly level.
Ensure the product was stored flat in a dry environment and allowed to acclimate to room temperature for 48 hours before fitting.
For a successful installation, ensure your wall surface is flat, dry, and clean. If the wall is uneven, install timber battens at 400mm intervals to create a level frame. For cleaning and care, simply wipe down the surfaces with a soft, dry cloth or a slightly damp microfiber duster. Avoid using abrasive cleaners, harsh chemicals, or soaking the boards with water, as this will damage the MDF core and the factory-applied finish.
