Laser Tools Mini Air Needle De-Scaler - 9218
Best current price£166.51from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£166.51Visit shop Laser Tools Mini Air Needle De-Scaler - 9218
Visit shopeBay£166.51Visit shop All Offers
2 offers from £166.51 - £176.76
View price history by clicking the chart icon.
LASER 9218 Pneumatic Needle Scaler Steel Air-Powered Rust Removal ToolFree delivery in 1–3 days£176.76Visit shop →
Product Information
Full details
The Laser Tools Mini Air Needle De-Scaler (9218) is designed for professionals needing to remove rust, scale, and weld spatter in tight spaces. Its key benefit is its lightweight, compact design that allows for easy maneuverability in confined areas, achieving up to 3000 BPM. A potential caveat is the need for consistent daily oiling to maintain performance and longevity.
All features
| Model Part Number | 9218 |
|---|---|
| Brand | Laser |
Extended Product Information
FAQs
What is the primary purpose of the Laser Tools Mini Air Needle De-Scaler?
Its primary purpose is to remove rust, scale, paint, and weld spatter, particularly in hard-to-reach areas due to its compact and lightweight design.
How often should I oil the tool?
The tool should be oiled daily, typically by adding a few drops of pneumatic tool oil into the air inlet before each use.
What is the required air pressure for this tool?
The recommended working pressure is 90 PSI.
Can this tool be used for heavy-duty industrial applications?
While powerful for its size, it is designed primarily for precision work in confined spaces. For very large-scale or heavy-duty surface preparation, a larger tool might be more appropriate.
What safety precautions should I take when using this tool?
Always wear eye and ear protection. Ensure the safety trigger lever is engaged when not actively using the tool to prevent accidental activation.
What is the air consumption rate?
The tool consumes approximately 1.7 CFM (Cubic Feet per Minute) of air.
What are the dimensions and weight of the tool?
It weighs 587g, has a length of 236mm, and a diameter of 28.5mm.
Troubleshooting
Tool not delivering enough power or needles not vibrating effectively.
Ensure the tool has been oiled daily. Check air pressure is set to 90 PSI and that the air supply is adequate (1.7 CFM minimum). Inspect air line for kinks or leaks.
Needles retracting fully and not working.
This may indicate a blockage or internal issue. Ensure daily oiling. If the problem persists, the tool may require servicing.
Air leaking from the tool body.
Check all connections, particularly the air inlet fitting. If the leak is from the main body, internal seals may need attention or replacement.
Excessive vibration or noise.
Ensure needles are properly seated and not damaged. Check that the tool is being oiled correctly. Wear appropriate hearing protection as the standard operating noise level is 86dB.
Pros and Cons
Pros
- Excellent for intricate work in confined areas due to its compact size.
- Lightweight construction minimizes operator fatigue during extended use.
- Safety trigger adds an important layer of protection.
- High BPM ensures rapid removal of rust, paint, and scale.
- Efficient air consumption suitable for standard air compressors.
Cons
- Requires daily oiling to prevent internal damage and ensure smooth operation.
- Noise level of 86dB necessitates hearing protection.
- Not designed for heavy-duty, large-scale surface preparation.
- Potential for needle breakage if used improperly on extremely hard surfaces.
Setup, Compatibility & Care
Setup:
- Connect the tool to an air supply via the 1/4" BSP air inlet.
- Ensure your air compressor is set to deliver a working pressure of 90 PSI.
- Before each use, oil the tool daily. Add a few drops of pneumatic tool oil into the air inlet.
Compatibility:
- Requires an air compressor capable of delivering at least 1.7 CFM at 90 PSI.
- Standard workshop air hoses with a 1/4" fitting are compatible.
Care:
- Daily Oiling: Crucial for longevity and performance. Apply appropriate pneumatic tool oil before each use.
- Storage: Store in a clean, dry environment. Ensure the tool is disconnected from the air supply when not in use.
- Needle Maintenance: Inspect needles regularly for wear or damage. Replace as needed.
- Cleaning: Wipe down the exterior with a clean cloth after use. Avoid using abrasive cleaners.