Glass Scorer Cutter - AB Tools - TF379

This scorer is suitable for most flat glass types with a thickness of approximately 3mm to 10mm. It is not designed for tempered glass.

After making a single, continuous score line, gently tap the underside of the glass along the score line, or apply even pressure from the back. A straight edge placed underneath can help guide the break.

The diamond tip on this model is not designed to be user-replaceable. If it becomes damaged, the entire tool typically needs replacement.

While not strictly required, using a small amount of glass cutting oil on the score line can help create a smoother score and a cleaner break, especially on thicker glass.

The total tool length is 180mm.

Wipe the diamond tip clean after each use and store it in a dry place to prevent damage. Check screws periodically for tightness.

This scorer is primarily designed for straight cuts on flat glass and is not ideal for cutting bottles or curved surfaces.

Ensure the diamond tip is clean and sharp. Apply consistent, even pressure. Use a ruler or straight edge as a guide. For smoother scoring, consider using a small amount of cutting oil on the glass surface before scoring.

Check the brass twin thread screws and tighten them gently if necessary. Ensure the handle is securely attached to the cutting head.

Use a metal ruler or straight edge firmly against the glass as a guide. Practice making score lines on scrap glass to improve technique. Apply slow, steady pressure.

Inspect the tip for any chips or cracks. If the diamond tip is visibly damaged, the tool may need to be replaced as it will not score effectively or safely.