Best current price£7.28from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£7.28Visit shop Sourcingmap Furniture Plastic 5Mm Hole Drilling Cover Plugs Insert 130Pcs White 712662343202
Visit shop1 offer from £7.28
View price history by clicking the chart icon.
These furniture hole cover plugs are designed for DIY enthusiasts and homeowners looking to achieve a clean, professional finish on cabinetry, shelves, and various furniture pieces. The primary benefit is their ability to seamlessly hide unsightly drilling holes while protecting the interior of the opening from dust and debris. A key caveat to keep in mind is that they are specifically engineered for mounting diameters between 3mm and 5mm, so accurate measurement of your existing holes is essential before installation.
| Model Part Number | DOESNOTAPPLY |
|---|---|
| Brand | uxcell |
While the plastic surface is smooth, standard house paint may not adhere well. If you must change the color, use a plastic-bonding primer first.
These are primarily designed for indoor use. While they are plastic, prolonged exposure to extreme UV rays may cause the material to become brittle over time.
Yes, you can gently pry them out using a thin flat-head screwdriver or a fingernail, provided you work carefully to avoid scratching the surrounding finish.
No, this specific pack contains 130 pieces of the same size, optimized for 3mm to 5mm holes.
They are standard household grade and intended for ambient temperatures; they should not be used in high-heat areas like inside ovens or near direct flame sources.
Verify that the hole diameter is not larger than 5mm. If the hole is too wide, the plug cannot create sufficient friction.
Ensure there are no drill burrs or excess wood fibers inside the hole. Clean the edges with a hobby knife or fine-grit sandpaper before re-inserting.
To install, ensure the hole is clear of any wood splinters or debris that might interfere with the friction fit. Simply align the plug with the opening and press firmly with your thumb until the cap is flush against the surface.
Regarding compatibility, always use a caliper or a measuring tape to verify that your hole diameter is between 3mm and 5mm. If a hole is slightly smaller than 3mm, do not force the plug as it may deform; if it is larger than 5mm, the plug will not achieve the necessary friction to remain secure. For care, simply wipe down with a mild soap solution if necessary, avoiding harsh abrasive chemicals that may cause the white plastic finish to yellow or degrade over time.
