DriveTex Non-Woven Geotextile Driveway Landscaping Fabric - 2.25m x 25m

Yes, it acts as an effective weed suppressant and stabilizer under decking structures.

Yes, it is a non-woven geotextile designed to allow water to pass through while retaining soil particles.

The fabric is designed for underground use. Exposure to direct sunlight for extended periods should be avoided; it should be covered with aggregate shortly after installation.

A minimum overlap of 200mm to 300mm is recommended between adjacent sheets to prevent subsoil migration.

While it is a heavy-duty fabric suitable for stabilization, check your specific equestrian surface requirements to ensure this grade meets the load-bearing needs of your project.

MOT Type 1 is a graded crushed stone that packs tight, while MOT Type 3 is a 'fines-free' aggregate often used for permeable drainage applications. Both are compatible with DriveTex.

Avoid dropping heavy, sharp-edged boulders directly onto the fabric from a height. Use a skid steer or dump truck to spread the aggregate gently across the surface.

Use ground staples or pins to secure the edges of the geotextile to the subsoil before placing your base layer on top.

Ensure that the fabric is not being blocked by excessive amounts of clay or fine silt during the initial installation phase; clear any excessive debris from the subsoil surface before laying.