CRUD RoadRacer MK3 Mudguards - Front & Rear Wraparound 700c
The Crud RoadRacer MK3 Mudguards are a front and rear mudguard set designed for road bikes. These ...The Crud RoadRacer MK3 Mudguards are a front and rear mudguard set designed for road bikes. These quick-fixing mudguards fit 700c wheels and accommodate tyre widths up to 38mm. They feature the DUOTECH 'interloc' fixing system, allowing for tool-free fitting in under 30 seconds. The mudguards are lightweight, weighing only 260 grams per pair, and are designed to fit bikes with as little as 4mm of clearance. They are compatible with both disc and caliper brakes. The innovative fitting system allows the mudguard to 'hover' close to the tyre without rubbing, thanks to in-built and replaceable pile brushes, and keeps the mudguard central over the wheel. The minimalist design looks good on high-end bikes.
Crud MK3 Roadracer Full Mudguard SetFree delivery in 1–3 days£39.99Visit shop →
Product Information
Full details
This guide helps cyclists understand and effectively use the CRUD RoadRacer MK3 Mudguards. Designed for road bikes with 700c wheels and up to 38mm tire widths, these mudguards offer quick, tool-free installation and lightweight protection. Note that while they fit a wide range of bikes, ensuring adequate clearance (at least 4mm) is crucial for optimal performance.
All features
Model Part Number
MGC103
Brand
Crud
Extended Product Information
FAQs
How do I install the mudguards?
Follow the instructions for the DUOTECH 'interloc' fixing system, which allows for tool-free installation in under 30 seconds.
What tire sizes are these mudguards compatible with?
They are designed for 700c wheels and accommodate tires up to 38mm wide.
Are these mudguards compatible with disc brakes?
Yes, they are compatible with both disc and caliper brakes.
How do I clean the mudguards?
Clean them regularly with a damp cloth to remove dirt and debris.
What is the weight of the mudguards?
They weigh only 260 grams per pair.
What is the DUOTECH 'interloc' fixing system?
It is a quick and tool-free system that allows easy installation and adjustment of the mudguards.
What if the mudguards don't fit my bike?
Ensure your bike has the minimum required 4mm of clearance. If there's still a problem, check your frame geometry.
Troubleshooting
Mudguards are rubbing against the tire.
Check the alignment and ensure sufficient clearance. Adjust the mudguard position using the fixing system.
Mudguards are loose or unstable.
Tighten the fixing system. Ensure all components are properly secured.
Mudguards are not providing adequate protection.
Verify the correct mudguard size for your tires and check the alignment.
Pros and Cons
Pros
Easy and fast tool-free installation.
Lightweight design, minimizing impact on performance.
Suitable for a wide range of road bike tire sizes.
Compatible with both disc and caliper brakes.
Effective protection against mud and spray.
Sleek and minimalist design.
Cons
Requires at least 4mm clearance between tire and frame/fork.
May not be suitable for all road bike frame geometries.
Performance depends on correct installation and alignment.
Mudguard positioning may require occasional adjustment.
Setup, Compatibility & Care
Installation:
Ensure the bike has the required 4mm of clearance.
Follow the DUOTECH 'interloc' fixing system instructions for tool-free installation.
Ensure the mudguards are correctly aligned over the wheels.
Compatibility:
Compatible with 700c wheels.
Fits tires up to 38mm wide.
Works with both disc and caliper brakes.
Check for sufficient frame/fork clearance before installation.
Care:
Regularly clean the mudguards with a damp cloth to remove dirt and debris.
Check and replace the pile brushes if worn or damaged.
Inspect the fixing system periodically to ensure it remains secure.