6.35mm Stereo Jack Plug to Twin 6.35mm Mono Jack Plugs Splitter - 6m - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The kenable 004359 Y-lead is an essential connectivity solution for audio engineers, live performers, and studio technicians who require reliable signal splitting or insert routing. Featuring a 6m length and pure copper conductors, it offers high-quality signal transmission for patch bays and effects processors, though its length may require careful cable management to avoid signal loss or tangling in high-traffic studio environments.
All features
| Colour | Black |
|---|---|
| Model Part Number | 004359 |
| Brand | kenable |
Extended Product Information
FAQs
Can I use this cable for a microphone?
No, this cable is designed for line-level signals and 6.35mm jacks. Microphones typically require XLR connectors.
Is this a balanced or unbalanced cable?
This Y-lead is generally used for unbalanced send/return insert applications.
Can I use this to combine two mono signals into one stereo output?
While it can be used in reverse, it is technically designed as a splitter. Use caution as impedance mismatches can occur.
What does RoHS compliance mean for this cable?
It means the cable is manufactured without restricted hazardous substances, ensuring it meets environmental safety standards.
Are the connectors gold-plated?
The product features standard metal connectors; please refer to your specific unit for finish details.
Troubleshooting
Humming or buzzing noise
Ensure the cable is not running parallel to power lines. If the hum persists, check that the ground connections on the connected equipment are secure.
Intermittent signal loss
Clean the jack plugs with a contact cleaner spray and check for loose connections at both the console and the outboard gear.
Only one side of the signal is working
Verify that your output device is set to send a stereo signal and check that the twin mono jacks are correctly assigned to the left and right input channels.
Pros and Cons
Pros
- High-quality copper construction for clear signal
- Generous 6-meter length for flexible studio setups
- Ideal for insert and send/return signal routing
- Standardized 6.35mm connectors fit most professional gear
Cons
- Long cable length requires management to prevent tangling
- Not intended for unbalanced long-run signals if interference is high
- Limited to 1/4 inch connection points
Setup, Compatibility & Care
To use this cable, ensure your equipment supports 6.35mm (1/4 inch) TRS or TS connections. The single stereo jack is typically used for stereo output or insert points, while the twin mono jacks connect to inputs/outputs of outboard gear. To maintain the life of the cable: 1. Always unplug by pulling on the connector housing, not the cable jacket. 2. Store the cable by coiling it loosely using the 'over-under' technique to prevent internal wire breakage. 3. Avoid stepping on the cable or running it under heavy equipment, as this can compress the shielding and cause ground loops or noise.