Bond It Levelmaster Ad-Floor Plus Self Level Leveling Compound - Grey - 20Kg
A protein-free, latex modified, flexible, high-performance cementitious floor levelling compound s...A protein-free, latex modified, flexible, high-performance cementitious floor levelling compound suitable for use at thicknesses from 3mm to 50mm. It conforms to EN13813 CT-C25-F6. Benefits include flexibility, high early strength, suitability for application up to 50mm in one layer, pumpability, low odour formulation, suitability for use with underfloor heating, and self-smoothing properties. AD-FLOOR PLUS is ideal for levelling most common internal subfloors before installing floor coverings such as ceramic floor tiles, carpet, vinyl, and wood flooring. It contains powdered latex, eliminating the need for separate latex liquids. It may be used over concrete and cement-based substrates, calcium sulphate (gypsum) screeds, properly prepared old ceramic tiles, natural stone, terrazzo, properly prepared old water-resistant adhesive residues, and new mastic asphalt screeds.
This guide is for anyone looking to level internal subfloors before installing floor coverings. Bond It Levelmaster Ad-Floor Plus provides a flexible, high-performance solution, offering high early strength and self-smoothing properties. However, it's essential to ensure proper substrate preparation for optimal results.
All features
Brand
Bond it
Extended Product Information
FAQs
What is the coverage rate?
Coverage rates vary based on the depth of the application and the substrate. Always refer to the product packaging for specific coverage details.
How long does it take to dry?
Drying times can vary. Refer to the product packaging for the specific drying and curing times, typically dependent on the thickness and environmental conditions.
Can it be used on exterior surfaces?
This product is designed for internal use only. It is not suitable for exterior applications.
What type of flooring can be installed over it?
It is suitable for use under ceramic floor tiles, carpet, vinyl, and wood flooring.
What is the maximum thickness I can apply in one layer?
You can apply up to 50mm in a single layer.
Do I need to prime the surface before applying?
Yes, priming is recommended to ensure optimal adhesion. Follow the substrate-specific priming instructions on the product packaging.
Is this product suitable for use with underfloor heating?
Yes, Bond It Levelmaster Ad-Floor Plus is compatible with underfloor heating systems.
What safety precautions should I take when using this product?
Wear appropriate personal protective equipment (PPE), including gloves, eye protection, and a dust mask. Ensure adequate ventilation during mixing and application.
Troubleshooting
The leveling compound is not self-smoothing.
Ensure the mixture has the correct water ratio and is applied within the recommended temperature range. Also, check for any obstructions.
Cracking appears after drying.
Check that the substrate was properly prepared and primed. Ensure the product was not applied beyond the maximum thickness or exposed to extreme conditions during curing.
The compound is not adhering to the substrate.
Verify the substrate was properly primed and is clean and free of contaminants. Ensure the correct primer was used for the substrate material.
Pros and Cons
Pros
High performance
Easy to use
Self smoothing
Suitable for various substrates
Flexible and durable
Quick project completion
Cons
Requires proper substrate preparation
May require additional tools for larger areas
Drying time must be considered
Application thickness must be within specified limits
Setup, Compatibility & Care
Preparation
Ensure the substrate is clean, dry, and free from loose particles.
Prime the substrate according to the manufacturer's instructions for the best adhesion.
Mix Bond It Levelmaster Ad-Floor Plus with the correct amount of water, following the guidelines on the packaging.
Compatibility
Compatible with concrete, cement-based substrates, calcium sulphate (gypsum) screeds, old ceramic tiles, natural stone, terrazzo, and old water-resistant adhesive residues.
Suitable for use with underfloor heating systems.
Care
Protect the applied surface from direct sunlight and drafts during the drying period.
Avoid heavy foot traffic until the product has fully cured.
Ensure proper ventilation during and after application.