Bristan Thermostatic Mixing Valve - Chrome, 15mm

TMV3 approval is a standard that ensures the valve meets strict performance and safety criteria, preventing scalding.

Refer to the manufacturer's instructions for specific temperature adjustment procedures. Typically, there is a temperature adjustment mechanism on the valve.

The filters should be cleaned regularly, depending on water quality, usually every 6-12 months, or as needed if flow is reduced.

The Bristan Thermostatic Mixing Valve comes with a five-year guarantee.

While it is possible, professional installation is recommended to ensure correct setup and optimal performance.

The valve automatically shuts off the mixed water supply to prevent scalding or freezing.

Part G compliance means the valve meets the requirements of the UK building regulations for sanitation, hot water safety and water efficiency.

Adjust the temperature setting on the valve according to the manufacturer's instructions. Check the hot and cold water supply pressures.

Clean or replace the serviceable filters. Check for any blockages in the pipes.

Inspect the connections for leaks and tighten if necessary. Check the seals and replace them if damaged.

Check that the water supply is turned on. Ensure that there are no blockages. Check for any internal faults.